On 15/02/2018 22:56, Jan Kundrát wrote:
Commit d8f4494e70ae removed comments which described this limitation.
The code supported interrupts even before.
Also add some spacing so that the chip IDs are a bit more readable.
Signed-off-by: Jan Kundrát <jan.kundrat@xxxxxxxxx>
---
drivers/pinctrl/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 01fe8e0455a0..3df05c1e1efc 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -161,10 +161,10 @@ config PINCTRL_MCP23S08
select REGMAP_SPI if SPI_MASTER
select GENERIC_PINCONF
help
- SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
- I/O expanders.
- This provides a GPIO interface supporting inputs and outputs.
- The I2C versions of the chips can be used as interrupt-controller.
+ SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
+ MCP23008 / MCP23017 / MCP23018 I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs and a
+ corresponding interrupt-controller.
config PINCTRL_OXNAS
bool
Reviewed-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
--
Regards
Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
