[PATCH 0/3] Add gpio interrupt support for Actions Semi S900 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset adds interrupt support for Actions Semi S900 GPIO's. Each
port has individual register sets for configuring the below interrupt
types:

1. Rising Edge Interrupt
2. Falling Edge Interrupt
3. High Level Interrupt
4. Low Level Interrupt

Thanks,
Mani

Manivannan Sadhasivam (3):
  dt-bindings: pinctrl: Add gpio interrupt bindings for Actions S900 SoC
  arm64: dts: actions: Add interrupt properties to pinctrl node for S900
  pinctrl: actions: Add interrupt support for OWL S900 SoC

 .../bindings/pinctrl/actions,s900-pinctrl.txt |  10 +
 arch/arm64/boot/dts/actions/s900.dtsi         |   8 +
 drivers/pinctrl/actions/Kconfig               |   1 +
 drivers/pinctrl/actions/pinctrl-owl.c         | 231 +++++++++++++++++-
 drivers/pinctrl/actions/pinctrl-owl.h         |  22 +-
 drivers/pinctrl/actions/pinctrl-s900.c        |  31 ++-
 6 files changed, 285 insertions(+), 18 deletions(-)

-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux