Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO

[Lee Jones <lee.jones@xxxxxxxxxx>]

On Wed, 16 May 2018, Hoan Tran wrote:

> Hi Phil,
> 
> On 5/11/18, 1:31 AM, "Phil Edworthy" <phil.edworthy@xxxxxxxxxxx> wrote:
> 
>     The DesignWare GPIO IP can be configured for either 1 interrupt or 1
>     per GPIO in port A, but the driver currently only supports 1 interrupt.
>     See the DesignWare DW_apb_gpio Databook description of the
>     'GPIO_INTR_IO' parameter.
>     
>     This change allows the driver to work with up to 32 interrupts, it will
>     get as many interrupts as specified in the DT 'interrupts' property.
>     It doesn't do anything clever with the different interrupts, it just calls
>     the same handler used for single interrupt hardware.
>     
>     Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>     Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>     Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>     ---
>     One point to mention is that I have made it possible for users to have
>     unconnected interrupts by specifying holes in the list of interrupts. This is
>     done by supporting the interrupts-extended DT prop.
>     However, I have no use for this and had to hack some test case for this.
>     Perhaps the driver should support 1 interrupt or all GPIOa as interrupts?
>     
>     v6:
>      - Treat DT and ACPI the same as much as possible. Note that we can't use
>        platform_get_irq() to get the DT interrupts as they are in the port
>        sub-node and hence do not have an associated platform device.
>     v5:
>      - Rolled ACPI companion code provided by Hoan Tran into this patch.
>     v4:
>      - Use of_irq_get() instead of of_irq_parse_one()+irq_create_of_mapping()
>     v3:
>      - Rolled mfd: intel_quark_i2c_gpio fix into this patch to avoid bisect problems
>     v2:
>      - Replaced interrupt-mask DT prop with support for the interrupts-extended
>        prop. This means replacing the call to irq_of_parse_and_map() with calls
>        to of_irq_parse_one() and irq_create_of_mapping().
>     ---
>      .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |  9 +++-
>      drivers/gpio/gpio-dwapb.c                          | 49 +++++++++++++++-------
>      drivers/mfd/intel_quark_i2c_gpio.c                 |  3 +-
>      include/linux/platform_data/gpio-dwapb.h           |  3 +-
>      4 files changed, 45 insertions(+), 19 deletions(-)
>     
>     diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
>     index 4a75da7..3c1118b 100644
>     --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
>     +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
>     @@ -26,8 +26,13 @@ controller.
>        the second encodes the triger flags encoded as described in
>        Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>      - interrupt-parent : The parent interrupt controller.
>     -- interrupts : The interrupt to the parent controller raised when GPIOs
>     -  generate the interrupts.
>     +- interrupts : The interrupts to the parent controller raised when GPIOs
>     +  generate the interrupts. If the controller provides one combined interrupt
>     +  for all GPIOs, specify a single interrupt. If the controller provides one
>     +  interrupt for each GPIO, provide a list of interrupts that correspond to each
>     +  of the GPIO pins. When specifying multiple interrupts, if any are unconnected,
>     +  use the interrupts-extended property to specify the interrupts and set the
>     +  interrupt controller handle for unused interrupts to 0.
>      - snps,nr-gpios : The number of pins in the port, a single cell.
>      - resets : Reset line for the controller.
>      
> Acked-by: Hoan Tran <hoan.tran@xxxxxxxxxxxxxxxxxxx>

Well that's new.  I've never seen a mailer reply like that before.

Which mailer are you using?  Might be worth sorting that out.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html