Re: [linux-sunxi] [PATCH v2 2/4] ARM: dtsi: add pwm node for sun8i.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2018-02-28 9:53 GMT+08:00 André Przywara <andre.przywara@xxxxxxx>:
> Hi,
>
> The subject line should mention the R40, there are far too many sun8i SoCs.

Okey.

>
> On 25/02/18 13:51, hao_zhang wrote:
>> This patch adds pwm node for sun8i.
>>
>> Signed-off-by: hao_zhang <hao5781286@xxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/sun8i-r40.dtsi | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
>> index 173dcc1..99a0261 100644
>> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
>> @@ -295,6 +295,11 @@
>>                               bias-pull-up;
>>                       };
>>
>> +                     pwm_ch0_pin: pwm-ch0-pin {
>> +                             pins = "PB2";
>> +                             function = "pwm";
>> +                     };
>> +
>>                       uart0_pb_pins: uart0-pb-pins {
>>                               pins = "PB22", "PB23";
>>                               function = "uart0";
>> @@ -306,6 +311,14 @@
>>                       reg = <0x01c20c90 0x10>;
>>               };
>>
>> +             pwm: pwm@1c23400 {
>> +                          compatible = "allwinner,sun8i-r40-pwm";
>> +                          reg = <0x01c23400 0x154>;
>
> Following my comments on the binding document:
>                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
>
>> +                          clocks = <&osc24M>;
>
> And possibly multiple clocks here (though I fail to find the APB1 clock
> being exposed by our CCU).

It seem CCU dosen't support APB1 clock for R40 PWM...

>
> Cheers,
> Andre.
>
>> +                          #pwm-cells = <3>;
>> +                          status = "disabled";
>> +             };
>> +
>>               uart0: serial@1c28000 {
>>                       compatible = "snps,dw-apb-uart";
>>                       reg = <0x01c28000 0x400>;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux