[PATCH v0 0/2] Add sdmmc UHS support to ROC-RK3328-CC board

[djw@xxxxxxxxxxxxx]

From: Levin Du <djw@xxxxxxxxxxxxx>

Hi all,

This is an attemp to add sdmmc UHS support to the ROC-RK3328-CC board.

It adds a new compatible `rockchip,rk3328-gpio-syscon10` to the gpio-syscon
driver,  so that a new gpio controller named `gpio_syscon10` can be defined
and used in the regulator-gpio. This regulator controls the signal voltage of the
sdmmc. It is essential for UHS support which requires 1.8V signal voltage.


Levin Du (2):
  gpio: syscon: Add gpio-syscon for rk3328
  arm64: dts: rockchip: Add sdmmc UHS support for roc-rk3328-cc

 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 36 ++++++++++++++++++++++++++
 drivers/gpio/gpio-syscon.c                     | 32 +++++++++++++++++++++++
 2 files changed, 68 insertions(+)

-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html