The driver stores the result of irq_set_type() in the internal variables irq_trig_raise and irq_trig_fall, which later are used to determine the GPIOs that must be re-configured as input. These variables retain their value between gpiolib's export / unexport, resulting in an incorrect state in some cases. The corresponding bits in the variables irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown(). Signed-off-by: Denis Grigoryev <grigoryev@xxxxxxxxxx> --- drivers/gpio/gpio-pca953x.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index d2ead4b..b41be8c 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -522,6 +522,15 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type) return 0; } +static void pca953x_irq_shutdown(struct irq_data *d) +{ + struct pca953x_chip *chip = irq_data_get_irq_chip_data(d); + u8 mask = 1 << (d->hwirq % BANK_SZ); + + chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask; + chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask; +} + static struct irq_chip pca953x_irq_chip = { .name = "pca953x", .irq_mask = pca953x_irq_mask, @@ -529,6 +538,7 @@ static struct irq_chip pca953x_irq_chip = { .irq_bus_lock = pca953x_irq_bus_lock, .irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock, .irq_set_type = pca953x_irq_set_type, + .irq_shutdown = pca953x_irq_shutdown, }; static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html