Allwinner H6 SoC has a R_PIO pin controller which controls PL and PM GPIO banks. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index db9da343ba46..a18b78fb4850 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -183,5 +183,18 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h6-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html