On Sun, Apr 22, 2018 at 12:53 PM, Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote: > These are only available on the Meson8m2 SoC (which uses the same > DesignWare Ethernet MAC as Meson8b). > The "eth_tx_clk_50m" signal either provides a 50MHz clock for the RMII > PHYs or the RGMII TX clock (as far as we know the frequency is > controlled by the PRG_ETHERNET registers in the Ethernet MAC "glue" IP > block). > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Patch applied with Kevin's ACK. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Mon, 30 Apr 2018 10:55:32 +0200
- In-reply-to: <20180422105330.4712-4-martin.blumenstingl@googlemail.com>
- References: <20180422105330.4712-1-martin.blumenstingl@googlemail.com> <20180422105330.4712-4-martin.blumenstingl@googlemail.com>
- References:
- [PATCH 0/3] pinctrl: meson: add support for the Meson8m2 SoC
- From: Martin Blumenstingl
- [PATCH 3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals
- From: Martin Blumenstingl
- [PATCH 0/3] pinctrl: meson: add support for the Meson8m2 SoC
- Prev by Date: Re: [PATCH 2/3] pinctrl: meson: meson8: add support for the Meson8m2 SoC
- Next by Date: Re: [PATCH] Revert "gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation"
- Previous by thread: [PATCH 3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals
- Next by thread: Re: [PATCH 0/3] pinctrl: meson: add support for the Meson8m2 SoC
- Index(es):
 |