Re: [PATCH v4] pinctrl: msm: fix gpio-hog related boot issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 12, 2018 at 9:01 PM, Christian Lamparter <chunkeey@xxxxxxxxx> wrote:

> Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
> Setting up any gpio-hog in the device-tree for his device would
> "kill the bootup completely":
>
> | [    0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
> | [    0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
> | [    1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
> | [    1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
> | [    1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
> | [    1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
> | [    1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
>
> This was also verified on a RT-AC58U (IPQ4018) which would
> no longer boot, if a gpio-hog was specified. (Tried forcing
> the USB LED PIN (GPIO0) to high.).
>
> The problem is that Pinctrl+GPIO registration is currently
> peformed in the following order in pinctrl-msm.c:
>         1. pinctrl_register()
>         2. gpiochip_add()
>         3. gpiochip_add_pin_range()
>
> The actual error code -517 == -EPROBE_DEFER is coming from
> pinctrl_get_device_gpio_range(), which is called through:
>         gpiochip_add
>             of_gpiochip_add
>                 of_gpiochip_scan_gpios
>                     gpiod_hog
>                         gpiochip_request_own_desc
>                             __gpiod_request
>                                 chip->request
>                                     gpiochip_generic_request
>                                        pinctrl_gpio_request
>                                           pinctrl_get_device_gpio_range
>
> pinctrl_get_device_gpio_range() is unable to find any valid
> pin ranges, since nothing has been added to the pinctrldev_list yet.
> so the range can't be found, and the operation fails with -EPROBE_DEFER.
>
> This patch fixes the issue by adding the "gpio-ranges" property to
> the pinctrl device node of all upstream Qcom SoC. The pin ranges are
> then added by the gpio core.
>
> In order to remain compatible with older, existing DTs (and ACPI)
> a check for the "gpio-ranges" property has been added to
> msm_gpio_init(). This prevents the driver of adding the same entry
> to the pinctrldev_list twice.
>
> Reported-by: Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx>
> Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>

This patch looks VERY good to me.

I am fine in merging it into pin control including the ranges
fixes.

I need Andy's and Bjorn's ACKs on it though!

Can you guys provide that?

It might be that Andy want the DTS changes separately to avoid
any collisions, so I'm fine with splitting it as well.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux