So far the interrupt type from the DTS is ignored, i.e. interrupt-parent = <&pcal6524> interrupts = <10 IRQ_TYPE_EDGE_RISING> does not overwrite a devm_request_threaded_irq(..., IRQ_TYPE_LEVEL_LOW, ...) in driver code. Therefore, the pca953x driver rejects the setup of the irq because it can only handle EDGE interrupts so far. This hack translates level interrupts to edge interrupts for the pca953x chips. This is enough for initial testing, but not a good solution since interrupts may be lost. If for example the connected chip requests a IRQ_TYPE_LEVEL_LOW this may have the reason that there may be multiple different interrupt sources in the chip - wired-or together to the input of the pca953x. Now if we do edge detecion only, the first interrupt will generate an EDGE_FALLING, but a second one won't ever if the first interrupt wasn't already processed. IMHO a better solution would be to make the pca953x interrupt handler check if the irq input is still in the active level and run the device specific handler again. But this is a major rework that I must leave to others with more knowledge and time to work on it. This RFC patch is for having a reminder. Not Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> --- drivers/gpio/gpio-pca953x.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index c70acba710c7..c21cfdee2eb6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -521,6 +521,11 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type) int bank_nb = d->hwirq / BANK_SZ; u8 mask = 1 << (d->hwirq % BANK_SZ); + if (type & IRQ_TYPE_LEVEL_LOW) + type |= IRQ_TYPE_EDGE_FALLING; + if (type & IRQ_TYPE_LEVEL_HIGH) + type |= IRQ_TYPE_EDGE_RISING; + if (!(type & IRQ_TYPE_EDGE_BOTH)) { dev_err(&chip->client->dev, "irq %d: unsupported type %d\n", d->irq, type); -- 2.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html