On Wed, Mar 28, 2018 at 8:47 PM, Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote: > Add gpio driver for Actions Semi OWL family S900 SoC. Set of registers > controlling the gpio shares the same register range with pinctrl block. > > GPIO registers are organized as 6 banks and each bank controls the > maximum of 32 gpios. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > +static void owl_gpio_update_reg(void __iomem *base, unsigned int pin, int flag) > +{ > + u32 val; > + > + val = readl_relaxed(base); > + > + if (flag) > + val |= BIT(pin); > + else > + val &= ~BIT(pin); > + > + writel_relaxed(val, base); > +} Hmm... Just realized that this driver misses locking. Something like owl_gpio_update_reg_locked() { spin_lock(); owl_gpio_update_reg(); spin_unlock(); } > + > +static int owl_gpio_request(struct gpio_chip *chip, unsigned int offset) > +{ > + struct owl_gpio *gpio = gpiochip_get_data(chip); > + > + /* > + * GPIOs have higher priority over other modules, so either setting > + * them as OUT or IN is sufficient > + */ > + owl_gpio_update_reg(gpio->base + GPIO_OUTEN, offset, true); ...to use in such cases. > + > + return 0; > +} > + > +static void owl_gpio_free(struct gpio_chip *chip, unsigned int offset) > +{ > + struct owl_gpio *gpio = gpiochip_get_data(chip); > + > + /* disable gpio output */ > + owl_gpio_update_reg(gpio->base + GPIO_OUTEN, offset, false); > + > + /* disable gpio input */ > + owl_gpio_update_reg(gpio->base + GPIO_INEN, offset, false); ...or spin_lock(); owl_gpio_update_reg(); owl_gpio_update_reg(); spin_unlock(); ...in this and similar cases. > +} -- With Best Regards, Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html