Add latest firmware property tags from the latest Raspberry Pi downstream kernel. This is needed for the GPIO tags, so we can control the GPIO multiplexor lines. Acked-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> --- v4: No change v3: Add Stefan's ack v2: No change --- include/soc/bcm2835/raspberrypi-firmware.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index cb979ad90401..50df5b28d2c9 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -63,6 +63,7 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008, RPI_FIRMWARE_GET_TURBO = 0x00030009, RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a, + RPI_FIRMWARE_GET_STC = 0x0003000b, RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c, RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d, RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e, @@ -72,12 +73,22 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, RPI_FIRMWARE_SET_TURBO = 0x00038009, + RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, + RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041, + RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041, + RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, + RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043, + RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, + RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, + RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, + /* Dispmanx TAGS */ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, @@ -91,6 +102,8 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, + RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, @@ -100,6 +113,7 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, @@ -108,6 +122,10 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html