RE: [PATCH/RFT v4] gpio: gpio-rcar: Support S2RAM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> From: Yoshihiro Kaneko, Sent: Monday, February 5, 2018 4:15 AM
> 
> From: Hien Dang <hien.dang.eb@xxxxxxxxxxx>
> 
> This patch adds an implementation that saves and restores the state of
> GPIO configuration on suspend and resume.
> 
> Signed-off-by: Hien Dang <hien.dang.eb@xxxxxxxxxxx>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
> [Modify structure of the bank info to simplify a saving registers]
> [Remove DEV_PM_OPS macro]
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
> ---

Thank you for the patch. Our team tested this patch and
an issue that an SD card detection pin doesn't work after resumed is resolved.
So,

Tested-by: Nguyen Viet Dung <dung.nguyen.aj@xxxxxxxxxxx>

Best regards,
Yoshihiro Shimoda

> This patch is based on the for-next branch of linux-gpio tree.
> 
> v2 [Yoshihiro Kaneko]
> * Modify structure of the bank info as suggested by Geert Uytterhoeven
> 
> v3 [Yoshihiro Kaneko]
> * Remove DEV_PM_OPS macro as suggested by Vladimir Zapolskiy
> 
> v4 [Yoshihiro Kaneko]
> * As suggested by Geert Uytterhoeven
>   - make the name of all members of gpio_rcar_bank_info accord with the
>     name of the registers
>   - fix type of the 'offset' variable in unsigned int
>   - fix the inverted logic in gpio_rcar_resume()
> 
>  drivers/gpio/gpio-rcar.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
> index e76de57..e5b0dbe 100644
> --- a/drivers/gpio/gpio-rcar.c
> +++ b/drivers/gpio/gpio-rcar.c
> @@ -31,6 +31,16 @@
>  #include <linux/spinlock.h>
>  #include <linux/slab.h>
> 
> +struct gpio_rcar_bank_info {
> +	u32 iointsel;
> +	u32 inoutsel;
> +	u32 outdt;
> +	u32 posneg;
> +	u32 edglevel;
> +	u32 bothedge;
> +	u32 intmsk;
> +};
> +
>  struct gpio_rcar_priv {
>  	void __iomem *base;
>  	spinlock_t lock;
> @@ -41,6 +51,7 @@ struct gpio_rcar_priv {
>  	unsigned int irq_parent;
>  	bool has_both_edge_trigger;
>  	bool needs_clk;
> +	struct gpio_rcar_bank_info bank_info;
>  };
> 
>  #define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
> @@ -531,11 +542,66 @@ static int gpio_rcar_remove(struct platform_device *pdev)
>  	return 0;
>  }
> 
> +#ifdef CONFIG_PM_SLEEP
> +static int gpio_rcar_suspend(struct device *dev)
> +{
> +	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
> +
> +	p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
> +	p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
> +	p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
> +	p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
> +	p->bank_info.posneg = gpio_rcar_read(p, POSNEG);
> +	p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL);
> +	if (p->has_both_edge_trigger)
> +		p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE);
> +
> +	return 0;
> +}
> +
> +static int gpio_rcar_resume(struct device *dev)
> +{
> +	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
> +	unsigned int offset;
> +	u32 mask;
> +
> +	for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
> +		mask = BIT(offset);
> +		/* I/O pin */
> +		if (!(p->bank_info.iointsel & mask)) {
> +			if (p->bank_info.inoutsel & mask)
> +				gpio_rcar_direction_output(
> +					&p->gpio_chip, offset,
> +					!!(p->bank_info.outdt & mask));
> +			else
> +				gpio_rcar_direction_input(&p->gpio_chip,
> +							  offset);
> +		} else {
> +			/* Interrupt pin */
> +			gpio_rcar_config_interrupt_input_mode(
> +				p,
> +				offset,
> +				!(p->bank_info.posneg & mask),
> +				!(p->bank_info.edglevel & mask),
> +				!!(p->bank_info.bothedge & mask));
> +
> +			if (p->bank_info.intmsk & mask)
> +				gpio_rcar_write(p, MSKCLR, mask);
> +		}
> +	}
> +
> +	return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP*/
> +
> +static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume);
> +
>  static struct platform_driver gpio_rcar_device_driver = {
>  	.probe		= gpio_rcar_probe,
>  	.remove		= gpio_rcar_remove,
>  	.driver		= {
>  		.name	= "gpio_rcar",
> +		.pm     = &gpio_rcar_pm_ops,
>  		.of_match_table = of_match_ptr(gpio_rcar_of_table),
>  	}
>  };
> --
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux