[PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.

There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.

Cc: patches@xxxxxxxxxxxxxxxxxxxxx
Cc: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Lee: this patch is touching the MFD core driver for WM8994,
but as with all other patches we just change the regulator
parts. Would be nice if you could ACK it.
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c | 18 ++++++++++++++++--
 drivers/mfd/wm8994-core.c                    |  9 ---------
 drivers/regulator/wm8994-regulator.c         | 19 +++++++++++--------
 include/linux/mfd/wm8994/pdata.h             |  3 ---
 4 files changed, 27 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index f00988705408..a4db97f156d7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
 
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
@@ -193,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
 	.ldo = {
-		 { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
-		 { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
 	},
 };
 
@@ -202,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
 	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
 	  .platform_data = &wm8994_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	  .dev_name = "wm8958",
+	},
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+	.dev_id = "i2c-wm8958", /* I2C device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 6,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPION", 4,
+			    "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -366,6 +379,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,
 					    rev == gf_mods[i].rev))
 			break;
 
+	gpiod_add_lookup_table(&wm8994_gpiod_table);
 	if (i < ARRAY_SIZE(gf_mods)) {
 		dev_info(&i2c->dev, "%s revision %d\n",
 			 gf_mods[i].name, rev + 1);
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 953d0790ffd5..c409464231f6 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -21,7 +21,6 @@
 #include <linux/mfd/core.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -302,14 +301,6 @@ static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
 	if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
 		pdata->lineout2fb = true;
 
-	pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
-	if (pdata->ldo[0].enable < 0)
-		pdata->ldo[0].enable = 0;
-
-	pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
-	if (pdata->ldo[1].enable < 0)
-		pdata->ldo[1].enable = 0;
-
 	return 0;
 }
 #else
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 7a4ce6df4f22..d3a5f48119c2 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/wm8994/core.h>
@@ -129,6 +129,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
 	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
 	struct regulator_config config = { };
 	struct wm8994_ldo *ldo;
+	struct gpio_desc *gpiod;
 	int ret;
 
 	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
@@ -145,12 +146,14 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
 	config.driver_data = ldo;
 	config.regmap = wm8994->regmap;
 	config.init_data = &ldo->init_data;
-	if (pdata) {
-		config.ena_gpio = pdata->ldo[id].enable;
-	} else if (wm8994->dev->of_node) {
-		config.ena_gpio = wm8994->pdata.ldo[id].enable;
-		config.ena_gpio_initialized = true;
-	}
+
+	/* Look up LDO enable GPIO from the parent device node */
+	gpiod = devm_gpiod_get_optional(pdev->dev.parent,
+					id ? "wlf,ldo2ena" : "wlf,ldo1ena",
+					GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+	config.ena_gpiod = gpiod;
 
 	/* Use default constraints if none set up */
 	if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
@@ -159,7 +162,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
 
 		ldo->init_data = wm8994_ldo_default[id];
 		ldo->init_data.consumer_supplies = &ldo->supply;
-		if (!config.ena_gpio)
+		if (!gpiod)
 			ldo->init_data.constraints.valid_ops_mask = 0;
 	} else {
 		ldo->init_data = *pdata->ldo[id].init_data;
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 90c60524a496..fca67bd194e2 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -20,9 +20,6 @@
 #define WM8994_NUM_AIF   3
 
 struct wm8994_ldo_pdata {
-	/** GPIOs to enable regulator, 0 or less if not available */
-	int enable;
-
 	const struct regulator_init_data *init_data;
 };
 
-- 
2.14.3

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html