Re: [linux-sunxi] [PATCH v2 5/6] arm64: allwinner: h6: add the basical Allwinner H6 DTSI file

[André Przywara <andre.przywara@xxxxxxx>]

Hi,

On 03/02/18 15:49, Icenowy Zheng wrote:
> Allwinner H6 is a new SoC with Cortex-A53 cores from Allwinner, with its
> memory map fully reworked and some high-speed peripherals (PCIe, USB
> 3.0) introduced.
> 
> This commit adds the basical DTSI file of it, including the clock
> support and UART support.

Checked the MMIO addresses and the interrupt numbers against the manual.

> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>

Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>

Thanks!
Andre.

> ---
> Changes in v2:
> - Add APB1 clock as PIO's APB clock.
> - Switched to SPDX license identifier.
> 
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 178 +++++++++++++++++++++++++++
>  1 file changed, 178 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> new file mode 100644
> index 000000000000..d4697bb42496
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -0,0 +1,178 @@
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@xxxxxxx>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun50i-h6-ccu.h>
> +#include <dt-bindings/reset/sun50i-h6-ccu.h>
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			device_type = "cpu";
> +			reg = <0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@1 {
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			device_type = "cpu";
> +			reg = <1>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@2 {
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			device_type = "cpu";
> +			reg = <2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@3 {
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			device_type = "cpu";
> +			reg = <3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	iosc: internal-osc-clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <16000000>;
> +		clock-accuracy = <300000000>;
> +		clock-output-names = "iosc";
> +	};
> +
> +	osc24M: osc24M_clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "osc24M";
> +	};
> +
> +	osc32k: osc32k_clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "osc32k";
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		ccu: clock@3001000 {
> +			compatible = "allwinner,sun50i-h6-ccu";
> +			reg = <0x03001000 0x1000>;
> +			clocks = <&osc24M>, <&osc32k>;
> +			clock-names = "hosc", "losc";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		gic: interrupt-controller@3021000 {
> +			compatible = "arm,gic-400";
> +			reg = <0x03021000 0x1000>,
> +			      <0x03022000 0x2000>,
> +			      <0x03024000 0x2000>,
> +			      <0x03026000 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +		};
> +
> +		pio: pinctrl@300b000 {
> +			compatible = "allwinner,sun50i-h6-pinctrl";
> +			reg = <0x0300b000 0x400>;
> +			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
> +			clock-names = "apb", "hosc", "losc";
> +			gpio-controller;
> +			#gpio-cells = <3>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +
> +			uart0_ph_pins: uart0-ph {
> +				pins = "PH0", "PH1";
> +				function = "uart0";
> +			};
> +		};
> +
> +		uart0: serial@5000000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x05000000 0x400>;
> +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clocks = <&ccu CLK_BUS_UART0>;
> +			resets = <&ccu RST_BUS_UART0>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@5000400 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x05000400 0x400>;
> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clocks = <&ccu CLK_BUS_UART1>;
> +			resets = <&ccu RST_BUS_UART1>;
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@5000800 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x05000800 0x400>;
> +			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clocks = <&ccu CLK_BUS_UART2>;
> +			resets = <&ccu RST_BUS_UART2>;
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@5000c00 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x05000c00 0x400>;
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clocks = <&ccu CLK_BUS_UART3>;
> +			resets = <&ccu RST_BUS_UART3>;
> +			status = "disabled";
> +		};
> +	};
> +};
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html