Re: [PATCH 3/6] gpio: Add GPIO driver for Nintendo Wii

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 15, 2018 at 4:13 AM, Jonathan Neuschäfer
<j.neuschaefer@xxxxxxx> wrote:

> This patch is based on code developed by Albert Herranz and the GameCube
> Linux Team, file arch/powerpc/platforms/embedded6xx/hlwd-gpio.c,
> available at https://github.com/DeltaResero/GC-Wii-Linux-Kernels, but
> has grown quite dissimilar.

I'm impressed by this effort. As with all reverse engineering.

> This driver currently uses __raw_readl and __raw_writel to access the
> GPIO controller's MMIO registers. I wonder if readl/writel plus explicit
> byte-swapping would be more correct, because it could be independent of
> the CPU's endianness. That said, this hardware only exists in two
> big-endian machines (Wii and Wii U).

I don't know about PPC but I think you're supposed to use
ioread32be() and iowrite32be() to do explicit BE access.

But when I look at it, I think you can just use the gpio-mmio library
for this driver and cut down code cosiderably.

> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

Can't you just save a pointer to struct device *dev in the
state container and use dev_info(state->dev, ...) etc instead
of this?

> +#include <linux/of_gpio.h>

This include should not be needed.

> +/*
> + * Update the bit with the given bit offset in the given register to a given
> + * value
> + */
> +static void hlwd_gpio_update_bit(struct gpio_chip *gc, unsigned int reg,
> +               int offset, int value)
> +{
> +       struct hlwd_gpio *hlwd = gpiochip_get_data(gc);
> +       unsigned long flags;
> +       u32 bit = 1UL << offset;

#include <linux/bitops.h>

u32 bit = BIT(offset);

> +       u32 tmp;
> +
> +       spin_lock_irqsave(&hlwd->lock, flags);
> +       tmp = __raw_readl(hlwd->regs + reg);
> +       if (value)
> +               __raw_writel(tmp | bit, hlwd->regs + reg);
> +       else
> +               __raw_writel(tmp & ~bit, hlwd->regs + reg);
> +       spin_unlock_irqrestore(&hlwd->lock, flags);
> +}

This looks very much like it is reimplementing the stuff we already
have in drivers/gpio/gpio-mmio.h.

There is even a big endian access flag for the library.
And you get so much for free with gpio-mmio.

select GPIO_GENERIC
in Kconfig

the helpers come in from <linux/gpio/driver.h>

Look at other drivers for inspiration:
git grep bgpio_init

If you need IRQ support you should probably have your own file
for this driver, but it will be just a few lines of wrapper using
bgpio_init() and BGPIOF_BIG_ENDIAN and/or possibly
BGPIOF_BIG_ENDIAN_BYTE_ORDER.

See the other drivers.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux