Hi, This patch series adds initial support for the Microsemi MIPS SoCs. It is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514). It adds support for the IRQ controller, pinmux and gpio controller and reset control. This produces a kernel that can boot to the console. This is a single series for reference but it can also be taken separately by each maintainer as each drivers are independant. Changes in v2: - removed the wildcard in MAINAINERS - corrected the Cc list - added proper documentation for both syscons - removed the mscc,cpucontrol property - updated the ranges property in the ocelot dtsi Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: linux-gpio@xxxxxxxxxxxxxxx Cc: Sebastian Reichel <sre@xxxxxxxxxx> Cc: linux-pm@xxxxxxxxxxxxxxx Alexandre Belloni (13): dt-bindings: Add vendor prefix for Microsemi Corporation dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: pinctrl: Add bindings for Microsemi Ocelot pinctrl: Add Microsemi Ocelot SoC driver dt-bindings: mips: Add bindings for Microsemi SoCs dt-bindings: power: reset: Document ocelot-reset binding power: reset: Add a driver for the Microsemi Ocelot reset MIPS: mscc: Add initial support for Microsemi MIPS SoCs MIPS: mscc: add ocelot dtsi MIPS: mscc: add ocelot PCB123 device tree MIPS: defconfigs: add a defconfig for Microsemi SoCs MAINTAINERS: Add entry for Microsemi MIPS SoCs .../interrupt-controller/mscc,ocelot-icpu-intr.txt | 22 + Documentation/devicetree/bindings/mips/mscc.txt | 46 ++ .../bindings/pinctrl/mscc,ocelot-pinctrl.txt | 39 ++ .../bindings/power/reset/ocelot-reset.txt | 17 + .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 7 + arch/mips/Kbuild.platforms | 1 + arch/mips/Kconfig | 24 + arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/mscc/Makefile | 6 + arch/mips/boot/dts/mscc/ocelot.dtsi | 115 +++++ arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 ++ arch/mips/configs/mscc_defconfig | 84 ++++ arch/mips/mscc/Makefile | 11 + arch/mips/mscc/Platform | 12 + arch/mips/mscc/setup.c | 106 +++++ drivers/irqchip/Kconfig | 5 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-mscc-ocelot.c | 109 +++++ drivers/pinctrl/Kconfig | 10 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ocelot.c | 505 +++++++++++++++++++++ drivers/power/reset/Kconfig | 7 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ocelot-reset.c | 86 ++++ 25 files changed, 1244 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt create mode 100644 arch/mips/boot/dts/mscc/Makefile create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts create mode 100644 arch/mips/configs/mscc_defconfig create mode 100644 arch/mips/mscc/Makefile create mode 100644 arch/mips/mscc/Platform create mode 100644 arch/mips/mscc/setup.c create mode 100644 drivers/irqchip/irq-mscc-ocelot.c create mode 100644 drivers/pinctrl/pinctrl-ocelot.c create mode 100644 drivers/power/reset/ocelot-reset.c -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html