On Mon, Oct 23, 2017 at 2:40 PM, Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> wrote: > Some GPIO blocks have the interrupt status (GPI_IS) offset different > than it normally is, so make it configurable. If no offset is specified > we use the default. > > While there remove two unused constants from the core driver. > > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Patch applied. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] pinctrl: intel: Make offset to interrupt status register configurable
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 1/2] pinctrl: intel: Make offset to interrupt status register configurable
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Tue, 31 Oct 2017 10:10:57 +0100
- In-reply-to: <20171023124026.48996-1-mika.westerberg@linux.intel.com>
- References: <20171023124026.48996-1-mika.westerberg@linux.intel.com>
- References:
- [PATCH 1/2] pinctrl: intel: Make offset to interrupt status register configurable
- From: Mika Westerberg
- [PATCH 1/2] pinctrl: intel: Make offset to interrupt status register configurable
- Prev by Date: Re: [PATCH] gpio-adnp: Use common error handling code in adnp_gpio_dbg_show()
- Next by Date: Re: [PATCH 1/4] Revert "gpio: set up initial state from .get_direction()"
- Previous by thread: Re: [PATCH 2/2] pinctrl: intel: Add Intel Cedar Fork PCH pin controller support
- Next by thread: [PATCH] pinctrl: uniphier: remove eMMC hardware reset pin-mux
- Index(es):
 |