Re: [PATCH v2 15/16] arm64: dts: marvell: armada-3720-db: enable second UART port

[Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>]

Hi Miquel,
 
 On ven., oct. 13 2017, Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> wrote:

> Enable Armada-3720-DB second UART port by adding the corresponding
> device tree node in the board DTS and enabling it.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx>
> Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
> ---

Applied on mvebu/dt64

Thanks,

Gregory

>  arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> index 9df0f06ce607..15713c19b3d0 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> @@ -216,7 +216,7 @@
>  
>  /*
>   * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
> - * an FTDI
> + * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
>   */
>  &uart0 {
>  	pinctrl-names = "default";
> @@ -224,6 +224,13 @@
>  	status = "okay";
>  };
>  
> +/* CON26(V2.0)/CON28(V1.4) */
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +	status = "okay";
> +};
> +
>  /* CON27(V2.0)/CON29(V1.4) */
>  &usb2 {
>  	status = "okay";
> -- 
> 2.11.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html