[PATCH v2 3/7] gpio: brcmstb: release the bgpio lock during irq handlers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The basic memory-mapped GPIO controller lock must be released
before calling the registered GPIO interrupt handlers to allow
the interrupt handlers to access the hardware.

Examples of why a GPIO interrupt handler might want to access
the GPIO hardware include an interrupt that is configured to
trigger on rising and falling edges that needs to read the
current level of the input to know how to respond, or an
interrupt that causes a change in a GPIO output in the same
bank. If the lock is not released before enterring the handler
the hardware accesses will deadlock when they attempt to grab
the lock.

Since the lock is only needed to protect the calculation of
unmasked pending interrupts create a dedicated function to
perform this and hide the complexity.

Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Acked-by: Gregory Fong <gregory.0xf0@xxxxxxxxx>
---
 drivers/gpio/gpio-brcmstb.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 2031b73e066c..fd8c0412f8af 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -63,6 +63,21 @@ brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
 	return bank->parent_priv;
 }
 
+static unsigned long
+brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
+{
+	void __iomem *reg_base = bank->parent_priv->reg_base;
+	unsigned long status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
+	status = bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
+		 bank->gc.read_reg(reg_base + GIO_MASK(bank->id));
+	spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
+
+	return status;
+}
+
 static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
 		unsigned int offset, bool enable)
 {
@@ -204,11 +219,8 @@ static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
 	struct irq_domain *irq_domain = bank->gc.irqdomain;
 	void __iomem *reg_base = priv->reg_base;
 	unsigned long status;
-	unsigned long flags;
 
-	spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
-	while ((status = bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
-			 bank->gc.read_reg(reg_base + GIO_MASK(bank->id)))) {
+	while ((status = brcmstb_gpio_get_active_irqs(bank))) {
 		int bit;
 
 		for_each_set_bit(bit, &status, 32) {
@@ -223,7 +235,6 @@ static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
 			generic_handle_irq(irq_find_mapping(irq_domain, bit));
 		}
 	}
-	spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
 }
 
 /* Each UPG GIO block has one IRQ for all banks */
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux