The rk3288 also has one function that can be routed to one of two pins, the hdmi cec functionality can use either gpio7c0 or gpio7c7. So add the route switching support for it. Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Tested-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> --- drivers/pinctrl/pinctrl-rockchip.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index b5cb7858ffdc..8dd49e2e144b 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -884,6 +884,24 @@ static struct rockchip_mux_route_data rk3228_mux_route_data[] = { }, }; +static struct rockchip_mux_route_data rk3288_mux_route_data[] = { + { + /* edphdmi_cecinoutt1 */ + .bank_num = 7, + .pin = 16, + .func = 2, + .route_offset = 0x264, + .route_val = BIT(16 + 12) | BIT(12), + }, { + /* edphdmi_cecinout */ + .bank_num = 7, + .pin = 23, + .func = 4, + .route_offset = 0x264, + .route_val = BIT(16 + 12), + }, +}; + static struct rockchip_mux_route_data rk3328_mux_route_data[] = { { /* uart2dbg_rxm0 */ @@ -3391,6 +3409,8 @@ static struct rockchip_pin_ctrl rk3288_pin_ctrl = { .type = RK3288, .grf_mux_offset = 0x0, .pmu_mux_offset = 0x84, + .iomux_routes = rk3288_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data), .pull_calc_reg = rk3288_calc_pull_reg_and_bit, .drv_calc_reg = rk3288_calc_drv_reg_and_bit, }; -- 2.14.2 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html