The pin2mask() accessor only shuffles BIT ORDER in big endian systems, i.e. the bitstuffing is swizzled big endian so "bit 0" is bit 7 or bit 15 or bit 31 or so. The brcmstb only uses big endian BYTE ORDER which will be taken car of by the ->write_reg() callback. Just use BIT(offset) to assign the bit. Cc: Gregory Fong <gregory.0xf0@xxxxxxxxx> Cc: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- drivers/gpio/gpio-brcmstb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c index 27e92e57adae..9b8fcca7ad17 100644 --- a/drivers/gpio/gpio-brcmstb.c +++ b/drivers/gpio/gpio-brcmstb.c @@ -20,6 +20,7 @@ #include <linux/irqchip/chained_irq.h> #include <linux/interrupt.h> #include <linux/reboot.h> +#include <linux/bitops.h> #define GIO_BANK_SIZE 0x20 #define GIO_ODEN(bank) (((bank) * GIO_BANK_SIZE) + 0x00) @@ -68,16 +69,15 @@ static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank, { struct gpio_chip *gc = &bank->gc; struct brcmstb_gpio_priv *priv = bank->parent_priv; - u32 mask = gc->pin2mask(gc, offset); u32 imask; unsigned long flags; spin_lock_irqsave(&gc->bgpio_lock, flags); imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id)); if (enable) - imask |= mask; + imask |= BIT(offset); else - imask &= ~mask; + imask &= ~BIT(offset); gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask); spin_unlock_irqrestore(&gc->bgpio_lock, flags); } -- 2.13.6 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html