On Mon, Oct 02, 2017 at 02:08:44PM +0200, Quentin Schulz wrote: > The X-Powers AXP209 has 3 GPIOs. GPIO0/1 can each act either as a GPIO, > an ADC or a LDO regulator. GPIO2 can only act as a GPIO. > > This adds the pinctrl features to the driver so GPIO0/1 can be used as > ADC or LDO regulator. > > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/pinctrl/pinctrl-axp209.txt | 28 +- In the future, please split bindings to separate patch. > drivers/pinctrl/pinctrl-axp209.c | 293 +++++++++++++++++++-- > 2 files changed, 300 insertions(+), 21 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt > index a6611304dd3c..388c04492afd 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-axp209.txt > @@ -1,4 +1,4 @@ > -AXP209 GPIO controller > +AXP209 GPIO & pinctrl controller > > This driver follows the usual GPIO bindings found in > Documentation/devicetree/bindings/gpio/gpio.txt > @@ -28,3 +28,29 @@ axp209: pmic@34 { > #gpio-cells = <2>; > }; > }; > + > +The GPIOs can be muxed to other functions and therefore, must be a subnode of > +axp_gpio. > + > +Example: > + > +&axp_gpio { > + gpio0_adc: gpio0_adc { Use '-' rather than '_' for node names. With that, Acked-by: Rob Herring <robh@xxxxxxxxxx> > + pins = "GPIO0"; > + function = "adc"; > + }; > +}; > + > +&example_node { > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio0_adc>; > +}; > + > +GPIOs and their functions > +------------------------- > + > +GPIO | Functions > +------------------------ > +GPIO0 | gpio_in, gpio_out, ldo, adc > +GPIO1 | gpio_in, gpio_out, ldo, adc > +GPIO2 | gpio_in, gpio_out -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html