Hi Miquel, On ven., oct. 06 2017, Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> wrote: > Add a node in Armada 37xx DTSI file for the second UART, with a > different compatible due to its extended IP which has some > differences with the first UART already in place. > > Make use of this commit to also fully describe the first port and > use the same clear and named interrupt bindings for both ports. > > The standard UART (UART0) uses level-interrupts while the extended > UART (UART1) uses edge-triggered interrupts. > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > index a36d667f770e..72b68f23c001 100644 > --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi > @@ -55,6 +55,7 @@ > > aliases { > serial0 = &uart0; > + serial1 = &uart1; > }; > > cpus { > @@ -136,7 +137,22 @@ > compatible = "marvell,armada-3700-uart"; > reg = <0x12000 0x200>; > clocks = <&xtalclk>; > - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + interrupts = > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; > + status = "disabled"; > + }; > + > + uart1: serial@12200 { > + compatible = "marvell,armada-3700-uart-ext"; > + reg = <0x12200 0x30>; > + clocks = <&xtalclk>; > + interrupts = > + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "uart-tx", "uart-rx"; > status = "disabled"; > }; > > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html