Re: [PATCH v3 12/12] ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 03, 2017 at 10:06:29AM +0800, Chen-Yu Tsai wrote:
> On Tue, Oct 3, 2017 at 4:42 AM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > On Mon, Oct 02, 2017 at 12:08:54PM +0000, Quentin Schulz wrote:
> >> On AXP813/818, GPIO0 and GPIO1 can be used as LDO as (respectively)
> >> ldo_io0 and ldo_io1.
> >>
> >> Let's add the pinctrl properties to the said regulators.
> >>
> >> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> >> ---
> >>  arch/arm/boot/dts/axp81x.dtsi | 14 ++++++++++++++
> >>  1 file changed, 14 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
> >> index f90f257130d5..099b0ddc1bbb 100644
> >> --- a/arch/arm/boot/dts/axp81x.dtsi
> >> +++ b/arch/arm/boot/dts/axp81x.dtsi
> >> @@ -52,6 +52,16 @@
> >>               compatible = "x-powers,axp813-gpio";
> >>               gpio-controller;
> >>               #gpio-cells = <2>;
> >> +
> >> +             gpio0_ldo: gpio0_ldo {
> >> +                     pins = "GPIO0";
> >> +                     function = "ldo";
> >> +             };
> >> +
> >> +             gpio1_ldo: gpio1_ldo {
> >> +                     pins = "GPIO1";
> >> +                     function = "ldo";
> >> +             };
> >
> > The node names are not supposed to contain any hyphens.
> 
> Hmm, I was under the impression that hyphens were preferred in
> node names, and a warning would be added to dtc later on.
> I might be wrong though.

I think there's a terminology issue here.

"-" is a hyphen or minus sign.
"_" is an underscore.

Underscores are not supposed to be used for node names, instead hyphens
are preferred.  I think Maxime means "underscore".

Here's the list from dtc/checks.c:

#define LOWERCASE       "abcdefghijklmnopqrstuvwxyz"
#define UPPERCASE       "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
#define DIGITS          "0123456789"
#define PROPNODECHARS   LOWERCASE UPPERCASE DIGITS ",._+*#?-"
#define PROPNODECHARSSTRICT     LOWERCASE UPPERCASE DIGITS ",-"

If strict mode is enabled, use of any of "._+#?" in the node name will
produce a warning.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux