Re: [PATCH v2 03/10] pinctrl: axp209: use drv_data of pinctrl_pin_desc to store pin reg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime,

On 26/09/2017 15:01, Maxime Ripard wrote:
> On Tue, Sep 26, 2017 at 12:17:13PM +0000, Quentin Schulz wrote:
>> Instead of using a function to retrieve each pin's correct control
>> register, use drv_data within pinctrl_pin_desc to store the ctrl reg.
>>
>> Remove axp20x_gpio_get_reg and replace every occurrence by a get from
>> drv_data.
> 
> Why do you need to do that? This should be explained.
> 

Agreed that it misses an explanation.

Today, to get a register addr of one of the GPIOs in the PMIC, we
basically get the GPIO number and returns the register via this info.

There are 3 GPIOs in AXP209, 2 in AXP813. I didn't want to have a switch
case for the GPIO number and then an if/else inside one of the case to
check if the device is AXP209 or AXP813 in which case we return -EINVAL
instead of the GPIO2 reg. With support for new PMIC, we would have a
bunch of if conditions and complexify the process for something really
simple.

IMHO, this also allows easier integration of future PMICs which might
have different regs for the GPIOs.

I don't *need* it but I find this solution nicer.

Thanks,
Quentin

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux