Re: [PATCH] pinctrl: intel: Mask interrupts on driver probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 21, 2017 at 02:20:03PM -0500, Kyle Roeschley wrote:
> Powering off the system on Apollo Lake does not clear the interrupt
> enable registers for the GPIOs. To avoid an interrupt storm on driver
> probe, clear all interrupt enables before enabling our interrupt line.

It is up to the BIOS to set the proper mask and program the pads
accordingly. Which platform and BIOS this is?

I would rather not do this because it might cause other problems.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux