On Intel Merrifield the pin control device is a separate IP block without any PCI or ACPI ID assigned. We need some means to allow the device be enumerated in ACPI environment (*). To achieve this without allocation special ACPI ID, which is really long and pretty much unachievable procedure, we just re-use special ACPI ID and standard compatible string. (*) ACPI is enabled via second bootloader, i.e. U-Boot, firmware is still left untouched and being SFI enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/pinctrl/intel/pinctrl-merrifield.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c index 86c4b3fab7b0..46fe30702a79 100644 --- a/drivers/pinctrl/intel/pinctrl-merrifield.c +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -931,10 +931,17 @@ static int mrfld_pinctrl_probe(struct platform_device *pdev) return 0; } +static const struct of_device_id mrfld_of_table[] = { + { .compatible = "intel,merrifield-pinctrl" }, + { }, +}; +MODULE_DEVICE_TABLE(of, mrfld_of_table); + static struct platform_driver mrfld_pinctrl_driver = { .probe = mrfld_pinctrl_probe, .driver = { .name = "pinctrl-merrifield", + .of_match_table = mrfld_of_table, }, }; -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html