Re: [PATCH 1/3] mfd: Add support for FTDI FT232H devices

[Anatolij Gustschin <agust@xxxxxxx>]

On Fri, 07 Jul 2017 09:48:48 +0200
Bjørn Mork bjorn@xxxxxxx wrote:

>[adding Johan on the CC list]
>
>Anatolij Gustschin <agust@xxxxxxx> writes:
>
>> +static struct usb_device_id ftdi_mfd_table[] = {
>> +	{ USB_DEVICE(0x0403, 0x6014) },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(usb, ftdi_mfd_table);  
>
>This device ID is currently handled by the ftdi_sio driver, so I believe
>you at least have to explain how you intend these two drivers to
>cooperate...

these drivers cannot cooperate, the different ftdi function modes
use same device pins as in UART mode. So, you either can use the
device in UART interface mode or in some different mode. I do not
load the ftdi_sio module or do unbind the USB device from the
ftdio_sio driver and bind it to the mfd driver, e.g.:

  sh -c "echo -n "3-2:1.0" > /sys/bus/usb/drivers/ftdi_sio/unbind"
  sh -c "echo -n "3-2:1.0" > /sys/bus/usb/drivers/ftdi-mfd/bind"

thanks,

Anatolij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html