[PATCH] pinctrl: uniphier: fix USB3 pin assignment for Pro4

[Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>]

According to pinctrl assignment for Pro4, each definition of USB#2 and
USB#3 are as follows.

  184: USB2VBUS
  185: USB2OD
  186: USB2ID
  187: USB3VBUS
  188: USB3OD

USB#2 has an additional pin "USB2ID", but the chip doesn't use this pin
while in host-mode. Considering this pin, the pin definitions for USB#3
should be {187, 188}.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
 drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
index a433a30..c75e094 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
@@ -1084,7 +1084,7 @@ static const unsigned usb1_pins[] = {182, 183};
 static const int usb1_muxvals[] = {0, 0};
 static const unsigned usb2_pins[] = {184, 185};
 static const int usb2_muxvals[] = {0, 0};
-static const unsigned usb3_pins[] = {186, 187};
+static const unsigned usb3_pins[] = {187, 188};
 static const int usb3_muxvals[] = {0, 0};
 static const unsigned port_range0_pins[] = {
 	300, 301, 302, 303, 304, 305, 306, 307,		/* PORT0x */
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html