Re: [PATCH v6 6/9] pinctrl: meson: add support for GPIO interrupts

[Heiner Kallweit <hkallweit1@xxxxxxxxx>]

Am 09.06.2017 um 11:06 schrieb Jerome Brunet:
> On Thu, 2017-06-08 at 21:39 +0200, Heiner Kallweit wrote:
>> Add support for GPIO interrupts and make use of the just introduced
>> irqchip driver handling the GPIO interrupt-controller.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
>> ---
>> v5:
>> - changed Kconfig entry based on Neil's suggestion
>> - extended comments
>> - fixed indentation
>> v6:
>> - no changes
>> ---
>>  drivers/pinctrl/Kconfig               |   1 +
>>  drivers/pinctrl/meson/pinctrl-meson.c | 170
>> +++++++++++++++++++++++++++++++++-
>>  2 files changed, 170 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
>> index 7ae04a97..86834dea 100644
>> --- a/drivers/pinctrl/Kconfig
>> +++ b/drivers/pinctrl/Kconfig
>> @@ -166,6 +166,7 @@ config PINCTRL_MESON
>>  	select PINCONF
>>  	select GENERIC_PINCONF
>>  	select GPIOLIB
>> +	select GPIOLIB_IRQCHIP
>>  	select OF_GPIO
>>  	select REGMAP_MMIO
>>  
>> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c
>> b/drivers/pinctrl/meson/pinctrl-meson.c
>> index 66ed70c1..7bacd4e3 100644
>> --- a/drivers/pinctrl/meson/pinctrl-meson.c
>> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
>> @@ -62,6 +62,8 @@
>>  #include "../pinctrl-utils.h"
>>  #include "pinctrl-meson.h"
>>  
>> +static struct irq_domain *meson_pinctrl_irq_domain;
>> +
>>  /**
>>   * meson_get_bank() - find the bank containing a given pin
>>   *
>> @@ -497,6 +499,154 @@ static int meson_gpio_get(struct gpio_chip *chip,
>> unsigned gpio)
>>  	return !!(val & BIT(bit));
>>  }
>>  
>> +static struct meson_pinctrl *meson_gpio_data_to_pc(struct irq_data *data)
>> +{
>> +        struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
>> +
>> +        return gpiochip_get_data(chip);
>> +}
>> +
>> +static int meson_gpio_bank_hwirq(struct meson_bank *bank, unsigned int
>> offset)
>> +{
>> +        int hwirq;
>> +
>> +        if (bank->irq_first < 0)
>> +                /* this bank cannot generate irqs */
>> +                return 0;
>> +
>> +        hwirq = offset - bank->first + bank->irq_first;
>> +
>> +        if (hwirq > bank->irq_last)
>> +                /* this pin cannot generate irqs */
>> +                return 0;
>> +
>> +        return hwirq;
>> +}
>> +
>> +static int meson_gpio_to_hwirq(struct irq_data *data)
>> +{
>> +	struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
>> +	unsigned int offset = data->hwirq;
>> +        struct meson_bank *bank;
>> +        int hwirq, ret;
>> +
>> +        offset += pc->data->pin_base;
>> +
>> +        ret = meson_get_bank(pc, offset, &bank);
>> +        if (ret)
>> +                return ret;
>> +
>> +        hwirq = meson_gpio_bank_hwirq(bank, offset);
>> +        if (!hwirq)
>> +                dev_dbg(pc->dev, "no interrupt for pin %u\n", offset);
>> +
>> +        return hwirq;
>> +}
>> +
>> +static void meson_gpio_irq_handler(struct irq_desc *desc)
>> +{
>> +        struct irq_chip *chip = irq_desc_get_chip(desc);
>> +        struct irq_data *gpio_irq_data = irq_desc_get_handler_data(desc);
>> +
>> +        chained_irq_enter(chip, desc);
>> +
>> +        if (gpio_irq_data)
>> +                generic_handle_irq(gpio_irq_data->irq);
>> +
>> +        chained_irq_exit(chip, desc);
>> +}
>> +
>> +static void meson_gpio_irq_unmask(struct irq_data *data) {}
>> +static void meson_gpio_irq_mask(struct irq_data *data) {}
>> +
>> +static void meson_gpio_irq_shutdown(struct irq_data *data)
>> +{
>> +	int hwirq = meson_gpio_to_hwirq(data);
>> +	int irq;
>> +
>> +	if (hwirq <= 0)
>> +		return;
>> +
>> +	/*
>> +	 * In case of IRQ_TYPE_EDGE_BOTH we need two parent interrupts,
>> +	 * one for each edge. That's due to HW constraints.
>> +	 * We use format 2 * GPIO_HWIRQ +(0|1) for the hwirq, so we can
>> +	 * have one GPIO_HWIRQ twice and derive the GPIO_HWIRQ from hwirq
>> +	 * by shifting hwirq one bit to the right.
>> +	 */
>> +	irq = irq_find_mapping(meson_pinctrl_irq_domain, hwirq * 2);
>> +	if (irq) {
>> +		irq_set_chained_handler_and_data(irq, handle_bad_irq, NULL);
>> +		irq_domain_free_irqs(irq, 1);
>> +	}
>> +
>> +	irq = irq_find_mapping(meson_pinctrl_irq_domain, hwirq * 2 + 1);
>> +	if (irq) {
>> +		irq_set_chained_handler_and_data(irq, handle_bad_irq, NULL);
>> +		irq_domain_free_irqs(irq, 1);
>> +	}
>> +}
>> +
>> +static int meson_gpio_irq_set_type(struct irq_data *data, unsigned int type)
>> +{
>> +	int hwirq = meson_gpio_to_hwirq(data);
>> +	struct irq_fwspec fwspec;
>> +        int irq, irq2, num_slots;
>> +
>> +	if (irqd_is_activated(data))
>> +		return -EBUSY;
> 
> Again, your implementation assume that:
> * irq_set_type should be called only once in the life of the irq.
> * and/or irq_set_type cannot be called from irq context
> 
> I don't agree with those assumptions.
> If irq_set_type could not called several times, to change the type at runtime,
> why would the irq framework bother providing "irq_set_irq_type" in the public
> API ? Why bother with irq_set_type callback at all ? It could all be done in the
> startup callback... 
> 
Due to the hardware restrictions we need a workaround for supporting
IRQ_TYPE_EDGE_BOTH. It may not support each and every theoretically possible
use case of irq_set_irq_type() but it works in the relevant scenarios and we
would have something NOW.
If somebody isn't happy with it he can still improve it.
Else we go on discussing until these chips are discontinued.

Against most negative side effects of calling irq_set_irq_type again we're
protected by rejecting calls when the IRQ is activated already.

And I made one more proposal:
We could in general reserve two parent irq's. Then we don't have the issue
with irq_set_irq_type (paying the price of supporting max. 4 gpio irq's).

> 
>> +
>> +	if (hwirq < 0)
>> +		return hwirq;
>> +
>> +	if (!hwirq)
>> +		return -ENXIO;
>> +
>> +	fwspec.fwnode = meson_pinctrl_irq_domain->fwnode;
>> +	fwspec.param_count = 2;
>> +
>> +	/*
>> +	 * The chip can create an interrupt for either rising or falling edge
>> +	 * only. Therefore use two interrupts in case of IRQ_TYPE_EDGE_BOTH,
>> +	 * first for falling edge and second one for rising edge.
>> +	 */
>> +	num_slots = (type == IRQ_TYPE_EDGE_BOTH) ? 2 : 1;
>> +
>> +	/* see comment in meson_gpio_irq_shutdown why we shift one bit here
>> */
>> +	fwspec.param[0] = hwirq << 1;
>> +	if (num_slots == 1)
>> +		fwspec.param[1] = type;
>> +	else
>> +		fwspec.param[1] = IRQ_TYPE_EDGE_FALLING;
>> +
>> +	irq = irq_create_fwspec_mapping(&fwspec);
>> +	if (!irq)
>> +		return -EINVAL;
>> +
>> +	irq_set_chained_handler_and_data(irq, meson_gpio_irq_handler, data);
>> +
>> +	if (num_slots > 1) {
>> +		fwspec.param[0]++;
>> +		fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
>> +		irq2 = irq_create_fwspec_mapping(&fwspec);
>> +		if (!irq2) {
>> +			irq_domain_free_irqs(irq, 1);
>> +			return -EINVAL;
>> +		}
>> +		irq_set_chained_handler_and_data(irq2,
>> meson_gpio_irq_handler, data);
>> +	}
>> +
>> +        return 0;
>> +}
>> +
>> +static struct irq_chip meson_gpio_irq_chip = {
>> +        .name = "GPIO",
>> +        .irq_set_type = meson_gpio_irq_set_type,
>> +        .irq_mask = meson_gpio_irq_mask,
>> +        .irq_unmask = meson_gpio_irq_unmask,
>> +        .irq_shutdown = meson_gpio_irq_shutdown,
>> +};
>> +
>>  static const struct of_device_id meson_pinctrl_dt_match[] = {
>>  	{
>>  		.compatible = "amlogic,meson8-cbus-pinctrl",
>> @@ -558,7 +708,8 @@ static int meson_gpiolib_register(struct meson_pinctrl
>> *pc)
>>  		return ret;
>>  	}
>>  
>> -	return 0;
>> +	return gpiochip_irqchip_add(&pc->chip, &meson_gpio_irq_chip, 0,
>> +				    handle_simple_irq, IRQ_TYPE_NONE);
>>  }
>>  
>>  static struct regmap_config meson_regmap_config = {
>> @@ -637,6 +788,23 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl
>> *pc,
>>  		return PTR_ERR(pc->reg_gpio);
>>  	}
>>  
>> +	if (!meson_pinctrl_irq_domain) {
> 
> This be in " struct meson_pinctrl *pc" not a global.
> Each instance should parse its own bindings and not rely on the other one for
> this !
> 
There can only be one such gpio irq controller node. Of course we could do
exactly the same parsing with exactly the same result twice, bit I don't
really see a benefit in it.

>> +		np = of_find_compatible_node(NULL, NULL, "amlogic,meson-gpio-
>> intc");
>> +		if (!np) {
>> +			dev_err(pc->dev, "interrupt controller DT node not
>> found\n");
>> +			return -EINVAL;
>> +		}
>> +
>> +		meson_pinctrl_irq_domain = irq_find_host(np);
>> +		if (!meson_pinctrl_irq_domain) {
>> +			dev_err(pc->dev, "interrupt controller not found\n");
>> +			of_node_put(np);
>> +			return -EINVAL;
>> +		}
>> +
>> +		of_node_put(np);
>> +	}
>> +
>>  	return 0;
>>  }
>>  
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html