Re: [PATCH v5] gpio: Add driver for ACPI INT0002 Virtual GPIO device

["Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>]

On Thursday, May 25, 2017 01:12:37 AM Rafael J. Wysocki wrote:
> On Wed, May 24, 2017 at 12:42 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> > Some peripherals on Bay Trail and Cherry Trail platforms signal PME to the
> > PMC to wakeup the system. When this happens software needs to clear the
> > PME_B0_STS bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
> >
> > This is modeled in ACPI through the INT0002 ACPI Virtual GPIO device.
> >
> > This commit adds a driver which registers the Virtual GPIOs expected
> > by the DSDT on these devices, letting gpiolib-acpi claim the
> > virtual GPIO and install a GPIO-interrupt handler which call the _L02
> > handler as it would for a real GPIO controller.
> >
> > Cc: joeyli <jlee@xxxxxxxx>
> > Cc: Takashi Iwai <tiwai@xxxxxxx>
> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > -Remove dev_err after malloc failure
> > -Remove unused empty runtime pm callbacks
> > -s/GPE0A_PME_/GPE0A_PME_B0_/
> > -Fixed some checkpatch warnings (I forgot to run checkpatch on v1)
> > Changes in v3:
> > -Rewrite as gpiochip driver letting gpiolib-acpi deal with claiming the pin
> >  0x0002 and calling the _L02 event handler when the virtual gpio-irq triggers
> > -Rebase on 4.12-rc1
> > Changes in v4:
> > -Drop device_init_wakeup() from _probe(), use pm_system_wakeup() instead
> >  of pm_wakeup_hard_event(chip->parent)
> > -Improve commit message
> > Changes in v5:
> > -Use BIT() macro for FOO_BIT defines
> > -Drop unneeded ACPI_PTR macro usage
> 
> LGTM
> 
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Linus,

This would be nice to have in 4.12 to unbreak things in there after some recent
ACPI changes (the feature in question have never worked entirely correctly to
be precise, but with this patch on top of the current -rc it actually does work).

I can queue it up if that's not a problem, but need your ACK for that.

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html