Re: [PATCH 1/8] serial: exar: Preconfigure xr17v35x MPIOs as output

[Jan Kiszka <jan.kiszka@xxxxxxxxxxx>]

Greg,

On 2017-05-13 09:28, Jan Kiszka wrote:
> This is the safe default for GPIOs with unknown external wiring.
> 
> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_exar.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 1270ff163f63..b4fa585156c7 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -177,13 +177,13 @@ static void setup_gpio(u8 __iomem *p)
>  	writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
>  	writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
>  	writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
> -	writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
> +	writeb(0xff, p + UART_EXAR_MPIOSEL_7_0);
>  	writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
>  	writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
>  	writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
>  	writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
>  	writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
> -	writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
> +	writeb(0xff, p + UART_EXAR_MPIOSEL_15_8);
>  	writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
>  }
>  
> 

Please drop from this tty-next, it may break Commtech adapters. I have
an update ready.

I may also send a fix on top if that is preferred, just let me know.

Thanks,
Jan

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html