[PATCH 3/3] pinctrl: bcm: clean up modular vs. non-modular distinctions

[Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>]

Fixups here tend to be more of a conglomerate of some of the other
repeated/systematic ones we've seen in the earlier pinctrl cleanups.

We remove module.h from code that isn't doing anything modular at
all;  if they have __init sections, then replace it with init.h

One driver has a .remove that would be dispatched on module_exit,
and as that code is essentially orphaned, so we remove it.  In case
anyone was previously doing the (pointless) unbind to get to that
function, we disable unbind for this one driver as well.

A couple bool drivers (hence non-modular) are converted over to
to builtin_platform_driver().

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Eric Anholt <eric@xxxxxxxxxx>
Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: Jon Mason <jonmason@xxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Ray Jui <rjui@xxxxxxxxxxxx>
Cc: Scott Branden <sbranden@xxxxxxxxxxxx>
Cc: Stefan Wahren <stefan.wahren@xxxxxxxx>
Cc: Sherman Yin <syin@xxxxxxxxxxxx>
Cc: bcm-kernel-feedback-list@xxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
---
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c   | 16 ++++++++--------
 drivers/pinctrl/bcm/pinctrl-bcm2835.c    | 20 +++-----------------
 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 11 +++++------
 3 files changed, 16 insertions(+), 31 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index 810a81786f62..e630f4d5f4c7 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -1,4 +1,10 @@
 /*
+ * Broadcom BCM281xx pinctrl driver
+ *
+ * Author(s):
+ *	Sherman Yin <syin@xxxxxxxxxxxx>
+ *	Broadcom Corporation <bcm-kernel-feedback-list@xxxxxxxxxxxx>
+ *
  * Copyright (C) 2013 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +18,7 @@
  */
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -1444,10 +1450,4 @@ static struct platform_driver bcm281xx_pinctrl_driver = {
 		.of_match_table = bcm281xx_pinctrl_of_match,
 	},
 };
-
-module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
-
-MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@xxxxxxxxxxxx>");
-MODULE_AUTHOR("Sherman Yin <syin@xxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 85d009112864..1eb7a1a5a4bb 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -27,7 +27,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -1075,31 +1075,17 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int bcm2835_pinctrl_remove(struct platform_device *pdev)
-{
-	struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
-
-	gpiochip_remove(&pc->gpio_chip);
-
-	return 0;
-}
-
 static const struct of_device_id bcm2835_pinctrl_match[] = {
 	{ .compatible = "brcm,bcm2835-gpio" },
 	{}
 };
-MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
 
 static struct platform_driver bcm2835_pinctrl_driver = {
 	.probe = bcm2835_pinctrl_probe,
-	.remove = bcm2835_pinctrl_remove,
 	.driver = {
 		.name = MODULE_NAME,
 		.of_match_table = bcm2835_pinctrl_match,
+		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver(bcm2835_pinctrl_driver);
-
-MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
-MODULE_DESCRIPTION("BCM2835 Pin control driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(bcm2835_pinctrl_driver);
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
index d31c95701a92..3684cca277ad 100644
--- a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
+++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
@@ -1,4 +1,8 @@
-/* Copyright (C) 2014-2015 Broadcom Corporation
+/*
+ * Broadcom Cygnus IOMUX driver
+ *
+ * Author: Ray Jui <rjui@xxxxxxxxxxxx>
+ * Copyright (C) 2014-2015 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -17,7 +21,6 @@
 
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
@@ -1016,7 +1019,3 @@ static int __init cygnus_pinmux_init(void)
 	return platform_driver_register(&cygnus_pinmux_driver);
 }
 arch_initcall(cygnus_pinmux_init);
-
-MODULE_AUTHOR("Ray Jui <rjui@xxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
-MODULE_LICENSE("GPL v2");
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html