Re: [PATCH V2 3/5] pinctrl: imx: add soc specific mux_mode mask and shift property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 19, 2017 at 03:05:43PM +0800, Dong Aisheng wrote:
> MX7ULP MUX mode mask and shift bit is different from VF610.
> Let's make it a platform specific property for the later easy of
> adding MX7ULP support.
> 
> One trick in exist code that Vybrid hardcoded the config part
> as 0xffff because its mux_config register BIT[15-0] are all configs
> part. But it's not true in ULP, so use mux_mask instead to address
> the difference.
> 
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Stefan Agner <stefan@xxxxxxxx>
> Cc: Bai Ping <ping.bai@xxxxxxx>
> Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
> Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>

Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux