This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
---
arch/arm/configs/lpc32xx_defconfig | 2 +-
arch/blackfin/configs/BF609-EZKIT_defconfig | 2 +-
arch/blackfin/mach-bf527/boards/tll6527m.c | 4 ++--
arch/blackfin/mach-bf609/boards/ezkit.c | 4 ++--
drivers/gpio/Kconfig | 17 -----------------
drivers/gpio/Makefile | 1 -
drivers/pinctrl/Kconfig | 13 +++++++++++++
drivers/pinctrl/Makefile | 1 +
.../gpio-mcp23s08.c => pinctrl/pinctrl-mcp23s08.c} | 0
9 files changed, 20 insertions(+), 24 deletions(-)
rename drivers/{gpio/gpio-mcp23s08.c => pinctrl/pinctrl-mcp23s08.c} (100%)
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 6ba430d2b5b2..e15fa5f168bb 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -112,7 +112,7 @@ CONFIG_GPIO_SX150X=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
index ba4267f658af..3ce77f07208a 100644
--- a/arch/blackfin/configs/BF609-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
@@ -105,7 +105,7 @@ CONFIG_SPI=y
CONFIG_SPI_ADI_V3=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index c1acce4c2e45..be61477826f3 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -348,7 +348,7 @@ static struct platform_device bfin_i2s = {
};
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
.chip[0].is_present = true,
@@ -423,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
{
.modalias = "mcp23s08",
.platform_data = &bfin_mcp23s08_sys_gpio_info,
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 9231e5a72b93..51157a255824 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -1887,7 +1887,7 @@ static struct platform_device i2c_bfin_twi1_device = {
};
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
.base = 120,
@@ -1929,7 +1929,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
{
I2C_BOARD_INFO("mcp23017", 0x21),
.platform_data = (void *)&bfin_mcp23s08_soft_switch0
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 23ca51ee6b28..5f88d7324e02 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1227,23 +1227,6 @@ config GPIO_PISOSR
endmenu
-menu "SPI or I2C GPIO expanders"
- depends on (SPI_MASTER && !I2C) || I2C
-
-config GPIO_MCP23S08
- tristate "Microchip MCP23xxx I/O expander"
- depends on OF_GPIO
- select GPIOLIB_IRQCHIP
- select REGMAP_I2C if I2C
- select REGMAP if SPI_MASTER
- help
- SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
- I/O expanders.
- This provides a GPIO interface supporting inputs and outputs.
- The I2C versions of the chips can be used as interrupt-controller.
-
-endmenu
-
menu "USB GPIO expanders"
depends on USB
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 68b96277d9fa..89f10061a5c1 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -77,7 +77,6 @@ obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o
obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
-obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 37af5e3029d5..b5aa50c51633 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -146,6 +146,19 @@ config PINCTRL_FALCON
depends on SOC_FALCON
depends on PINCTRL_LANTIQ
+config PINCTRL_MCP23S08
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on OF_GPIO
+ depends on SPI_MASTER || I2C
+ select GPIOLIB_IRQCHIP
+ select REGMAP_I2C if I2C
+ select REGMAP_SPI if SPI_MASTER
+ help
+ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+ I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs.
+ The I2C versions of the chips can be used as interrupt-controller.
+
config PINCTRL_MESON
bool
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 0e9b2226a7c2..59d793aa3db3 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o
+obj-$(CONFIG_PINCTRL_MCP23S08) += pinctrl-mcp23s08.o
obj-$(CONFIG_PINCTRL_MESON) += meson/
obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
similarity index 100%
rename from drivers/gpio/gpio-mcp23s08.c
rename to drivers/pinctrl/pinctrl-mcp23s08.c
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCHv3 01/14] gpio: mcp23s08: move to pinctrl
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCHv3 01/14] gpio: mcp23s08: move to pinctrl
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
- Date: Mon, 15 May 2017 11:24:25 +0200
- In-reply-to: <20170515092438.13076-1-sebastian.reichel@collabora.co.uk>
- References: <20170515092438.13076-1-sebastian.reichel@collabora.co.uk>
- Follow-Ups:
- Re: [PATCHv3 01/14] gpio: mcp23s08: move to pinctrl
- From: Sylvain Lemieux
- Re: [PATCHv3 01/14] gpio: mcp23s08: move to pinctrl
- References:
- [PATCHv3 00/14] mcp23s08 pinconf & cleanup
- From: Sebastian Reichel
- [PATCHv3 00/14] mcp23s08 pinconf & cleanup
- Prev by Date: [PATCHv3 04/14] pinctrl: mcp23s08: switch to regmap caching
- Next by Date: Re: [PATCH 1/5] pinctrl: imx: add generic pin config core support
- Previous by thread: [PATCHv3 04/14] pinctrl: mcp23s08: switch to regmap caching
- Next by thread: Re: [PATCHv3 01/14] gpio: mcp23s08: move to pinctrl
- Index(es):
 |