Re: pinctrl-sx150x.c broken in 4.11

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Wed, May 10, 2017 at 9:32 PM, Nikita Yushchenko
<nikita.yoush@xxxxxxxxxxxxxxxxxx> wrote:

> Looks like recent pinctrl changes - possibly commit 99e4f67508e1
> ("pinctrl: core: Use delayed work for hogs") - breaks pinctrl-sx150x
> driver in all setups where it has any pinctrl settings in device tree.
>
> AFAIU, pinctrl-sx150x is not a real pinctrl/pinmux driver,

It's as real as it gets.

> but it uses
> pinctrl subsystem to provide control over GPIO lines it provides.  But
> for user, it is just a i2c-gpio device that is enabled via device tree,
> and, like other devices, can have pinctrl-0 that points to "real" pinmux
> configuration for involved hardware lines (i.e. line used for interrupt).
>
> Problem is that when pinctrl-sx150x driver registers itself via
> pinctrl_register(), pinctrl map that corresponds to pinctrl-0 property
> of sx150x device tree node, is misinterpreted as hog.  Corresponding
> call chain is
>
>   pinctrl_enable() ->
>     pinctrl_claim_hogs() ->
>       create_pinctrl()
>
> at this point, registered pinctrl maps are scanned and matched by device
> name only, without checking map's control device. Then map is passed to
> add_setting() with pctldev set to sx150x which does not provide
> pinmux_ops, which errors out:
>
> sx150x-pinctrl 10-0020: does not support mux function
> sx150x-pinctrl 10-0020: could not map pin config for "VF610_PAD_PTB1"
> sx150x-pinctrl 10-0020: error claiming hogs: -22
> sx150x-pinctrl 10-0020: could not claim hogs: -22
> sx150x-pinctrl 10-0020: Failed to register pinctrl device
> sx150x-pinctrl: probe of 10-0020 failed with error -22
>
> Before commit 99e4f67508e1 ("pinctrl: core: Use delayed work for hogs")
> problem was hidden by not passing pinctrl device to add_setting(), but
> instead getting that from map.
>
> What is proper fix for this?

I bet Tony has the answer to this.

I think something similar to:
commit 6118714275f0a313ecc296a87ed1af32d9691bed
"pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()"
is needed?

Maybe we need to go over everything in drivers/pinctrl and check that
we don't have more of these broken hogs.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html