Re: [PATCH/RFC 0/4] sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

Hi Geert,

Thank you for the patches.

On Tuesday 09 May 2017 16:11:53 Geert Uytterhoeven wrote:
> 	Hi all,
> 
> Magnus reported that on sh7722/Migo-R, pinctrl registration fails with:
> 
>     sh-pfc pfc-sh7722: pin 0 already registered
>     sh-pfc pfc-sh7722: error during pin registration
>     sh-pfc pfc-sh7722: could not register: -22
>     sh-pfc: probe of pfc-sh7722 failed with error -22
> 
> pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
> array initializers, where the GPIO_* enums serve as indices.
> Apparently GPIO_PTQ7 was defined in the enum, but never used.
> If enum values are defined, but never used, pinmux_pins[] contains
> (zero-filled) holes.  Hence such entries are treated as pin zero, which
> was registered before, and initialization fails.
> 
> I can't see how this ever worked, as at the time of commit f5e25ae52feff2dc
> ("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
> drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
> drivers/pinctrl/core.c already had the check.
> 
> Some scripting revealed a few more broken drivers:
>   - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
>   - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
>     PINMUX_GPIO().
> 
> Patch 1 fixes the issue on sh7722, and was tested.
> Patches 3-4 should fix the issue on the other 3 SoCs, but was untested due
> to lack of hardware.

This all looks good to me, even if I can't test or verify patches 2/4 to 4/4 
as I don't have access to the hardware or datasheet either. Given that they're 
untested I wouldn't fake the error message in the commit log though, but just 
refer to the problem noticed on sh7722.

Apart from that, for the whole series,

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> Thanks for your comments!
> 
> Geert Uytterhoeven (4):
>   sh: sh7722: Remove nonexistent GPIO_PTQ7 to fix pinctrl registration
>   [RFC] sh: sh7757: Remove nonexistent GPIO_PT[JLNQ]7_RESV to fix
>     pinctrl registration
>   sh: sh7264: Remove nonexistent GPIO_PH[0-7] to fix pinctrl
>     registration
>   [RFC] sh: sh7269: Remove nonexistent GPIO_PH[0-7] to fix pinctrl
>     registration
> 
>  arch/sh/include/cpu-sh2a/cpu/sh7264.h | 4 +---
>  arch/sh/include/cpu-sh2a/cpu/sh7269.h | 4 +---
>  arch/sh/include/cpu-sh4/cpu/sh7722.h  | 2 +-
>  arch/sh/include/cpu-sh4/cpu/sh7757.h  | 8 ++++----
>  4 files changed, 7 insertions(+), 11 deletions(-)

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html