From: John Crispin <john@xxxxxxxxxxx> Add I2C nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@xxxxxxxxxxx> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx> --- arch/arm/boot/dts/mt7623.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 6adc21d..adb4793 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -243,6 +243,51 @@ status = "disabled"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html