Re: [PATCH v2 3/4] gpio: aspeed: Add debounce support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 7, 2017 at 2:59 PM, Andrew Jeffery <andrew@xxxxxxxx> wrote:

> Each GPIO in the Aspeed GPIO controller can choose one of four input
> debounce states: to disable debouncing for an input, or select from one
> of three programmable debounce timer values. Each GPIO in a
> four-bank-set is assigned one bit in each of two debounce configuration
> registers dedicated to the set, and selects a debounce state by
> configuring the two bits to select one of the four options.
>
> The limitation on debounce timer values is managed by mapping offsets
> onto a configured timer value and keeping count of the number of users
> a timer has. Timer values are configured on a first-come-first-served
> basis.
>
> A small twist in the hardware design is that the debounce configuration
> register numbering is reversed with respect to the binary representation
> of the debounce timer of interest (i.e. debounce register 1 represents
> bit 1, and debounce register 2 represents bit 0 of the timer numbering).
>
> Tested on an AST2500EVB with additional inspection under QEMU's
> romulus-bmc machine.
>
> Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux