Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes: > The nand_groups table uses different names for the NAND DQS pins than > the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0). > This prevents using the NAND DQS pins in the devicetree. > > I decided to rename both pins to nand_dqs_15 and nand_dqs_18 as both seem > to serve the same function, just exposed on different pins (unlike the > ethernet TX pins for example, where there's eth_txd0..3 - all of these > can be active at the same time as they are different data lines). > > Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> IMO, the fix should be a separate from the rename, since one is a fix for a real issue and the other is cosmetic. Kevin > --- > drivers/pinctrl/meson/pinctrl-meson8b.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c > index 76f077f18193..bf747eb1f3f4 100644 > --- a/drivers/pinctrl/meson/pinctrl-meson8b.c > +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c > @@ -267,8 +267,8 @@ static const unsigned int nand_ale_pins[] = { PIN(BOOT_11, 0) }; > static const unsigned int nand_cle_pins[] = { PIN(BOOT_12, 0) }; > static const unsigned int nand_wen_clk_pins[] = { PIN(BOOT_13, 0) }; > static const unsigned int nand_ren_clk_pins[] = { PIN(BOOT_14, 0) }; > -static const unsigned int nand_dqs_0_pins[] = { PIN(BOOT_15, 0) }; > -static const unsigned int nand_dqs_1_pins[] = { PIN(BOOT_18, 0) }; > +static const unsigned int nand_dqs_15_pins[] = { PIN(BOOT_15, 0) }; > +static const unsigned int nand_dqs_18_pins[] = { PIN(BOOT_18, 0) }; > > static const unsigned int sdxc_d0_c_pins[] = { PIN(BOOT_0, 0)}; > static const unsigned int sdxc_d13_c_pins[] = { PIN(BOOT_1, 0), PIN(BOOT_2, 0), > @@ -527,8 +527,8 @@ static struct meson_pmx_group meson8b_cbus_groups[] = { > GROUP(nand_cle, 2, 20), > GROUP(nand_wen_clk, 2, 19), > GROUP(nand_ren_clk, 2, 18), > - GROUP(nand_dqs_0, 2, 27), > - GROUP(nand_dqs_1, 2, 28), > + GROUP(nand_dqs_15, 2, 27), > + GROUP(nand_dqs_18, 2, 28), > GROUP(sdxc_d0_c, 4, 30), > GROUP(sdxc_d13_c, 4, 29), > GROUP(sdxc_d47_c, 4, 28), > @@ -739,8 +739,8 @@ static const char * const sdxc_c_groups[] = { > static const char * const nand_groups[] = { > "nand_io", "nand_io_ce0", "nand_io_ce1", > "nand_io_rb0", "nand_ale", "nand_cle", > - "nand_wen_clk", "nand_ren_clk", "nand_dqs0", > - "nand_dqs1" > + "nand_wen_clk", "nand_ren_clk", "nand_dqs_15", > + "nand_dqs_18" > }; > > static const char * const nor_groups[] = { -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html