On Sun, 2017-03-26 at 15:37 +0300, Andy Shevchenko wrote: > On Thu, 2017-03-23 at 12:12 +0000, Lee Jones wrote: > > > > On Fri, 17 Mar 2017, Andy Shevchenko wrote: > > > > > > > > Crystal Cove and Whiskey Cove are two different PMICs which are > > > installed on Intel Atom SoC based platforms. > > > > > > Moreover there are two independent drivers that by some reason > > > were > > > supposed (*) to get into one kernel module. > > > > > > Fix the mess by clarifying Kconfig option for Crystal Cove and > > > split > > > Whiskey Cove out of it. > > > > > > (*) It looks like the configuration was never tested with > > > INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. > > > > > > Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx> (supporter:ACPI) > > > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> (maintainer:GPIO > > > SUBSYSTEM) > > > Cc: Zhang Rui <rui.zhang@xxxxxxxxx> (supporter:THERMAL) > > > Cc: Eduardo Valentin <edubezval@xxxxxxxxx> (supporter:THERMAL) > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx > > > > > > > --- > > > - make option visible > > > - fix dependencies > > > drivers/acpi/Kconfig | 2 +- > > This needs an ACPI Ack before I can do anything with it. > Rafael, can you give you tag? > > > > > > > > > > > drivers/gpio/Kconfig | 2 +- > > > drivers/mfd/Kconfig | 14 ++++++++++++-- > > > drivers/mfd/Makefile | 2 +- > > > drivers/platform/x86/Kconfig | 2 +- > > > > > > drivers/thermal/Kconfig | 2 +- For the thermal part, Acked-by: Zhang Rui <rui.zhang@xxxxxxxxx> thanks, rui > > > 6 files changed, 17 insertions(+), 7 deletions(-) > > > > > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > > index 83e5f7e1a20d..03708e08fcb4 100644 > > > --- a/drivers/acpi/Kconfig > > > +++ b/drivers/acpi/Kconfig > > > @@ -512,7 +512,7 @@ config XPOWER_PMIC_OPREGION > > > > > > config BXT_WC_PMIC_OPREGION > > > bool "ACPI operation region support for BXT WhiskeyCove > > > PMIC" > > > - depends on INTEL_SOC_PMIC > > > + depends on INTEL_SOC_PMIC_BXTWC > > > help > > > This config adds ACPI operation region support for BXT > > > WhiskeyCove PMIC. > > > > > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > > > index 05043071fc98..9b1bcb4d0df7 100644 > > > --- a/drivers/gpio/Kconfig > > > +++ b/drivers/gpio/Kconfig > > > @@ -1054,7 +1054,7 @@ config GPIO_UCB1400 > > > > > > config GPIO_WHISKEY_COVE > > > tristate "GPIO support for Whiskey Cove PMIC" > > > - depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC > > > + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC > > > select GPIOLIB_IRQCHIP > > > help > > > Support for GPIO pins on Whiskey Cove PMIC. > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > > > index 55ecdfb74d31..e43afb8956ea 100644 > > > --- a/drivers/mfd/Kconfig > > > +++ b/drivers/mfd/Kconfig > > > @@ -425,18 +425,28 @@ config LPC_SCH > > > System Management Bus and General Purpose I/O. > > > > > > config INTEL_SOC_PMIC > > > - bool "Support for Intel Atom SoC PMIC" > > > + bool "Support for Crystal Cove PMIC" > > > depends on GPIOLIB > > > depends on I2C=y > > > select MFD_CORE > > > select REGMAP_I2C > > > select REGMAP_IRQ > > > help > > > - Select this option to enable support for the PMIC > > > device > > > + Select this option to enable support for Crystal Cove > > > PMIC > > > on some Intel SoC systems. The PMIC provides ADC, > > > GPIO, > > > thermal, charger and related power management > > > functions > > > on these systems. > > > > > > +config INTEL_SOC_PMIC_BXTWC > > > + tristate "Support for Intel Broxton Whiskey Cove PMIC" > > > + select MFD_CORE > > > + select REGMAP_IRQ > > > + help > > > + Select this option to enable support for Whiskey Cove > > > PMIC > > > + on Intel Broxton systems. The PMIC provides ADC, GPIO, > > > + thermal, charger and related power management > > > functions > > > + on these systems. > > > + > > > config MFD_INTEL_LPSS > > > tristate > > > select COMMON_CLK > > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > > > index 31ce07611a6f..201aeaf5112a 100644 > > > --- a/drivers/mfd/Makefile > > > +++ b/drivers/mfd/Makefile > > > @@ -207,8 +207,8 @@ obj-$(CONFIG_MFD_RT5033) += rt5033.o > > > obj-$(CONFIG_MFD_SKY81452) += sky81452.o > > > > > > intel-soc-pmic-objs := intel_soc_pmic_core.o > > > intel_soc_pmic_crc.o > > > -intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += > > > intel_soc_pmic_bxtwc.o > > > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > > > +obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += > > > intel_soc_pmic_bxtwc.o > > > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > > > > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > > > diff --git a/drivers/platform/x86/Kconfig > > > b/drivers/platform/x86/Kconfig > > > index e1bffc9bb194..883fbe7a2466 100644 > > > --- a/drivers/platform/x86/Kconfig > > > +++ b/drivers/platform/x86/Kconfig > > > @@ -1019,7 +1019,7 @@ config INTEL_PMC_IPC > > > config INTEL_BXTWC_PMIC_TMU > > > tristate "Intel BXT Whiskey Cove TMU Driver" > > > depends on REGMAP > > > - depends on INTEL_SOC_PMIC && INTEL_PMC_IPC > > > + depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC > > > ---help--- > > > Select this driver to use Intel BXT Whiskey Cove PMIC > > > TMU > > > feature. > > > This driver enables the alarm wakeup functionality in > > > the > > > TMU unit > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > > > index 776b34396144..751e50a3d946 100644 > > > --- a/drivers/thermal/Kconfig > > > +++ b/drivers/thermal/Kconfig > > > @@ -365,7 +365,7 @@ endmenu > > > > > > config INTEL_BXT_PMIC_THERMAL > > > tristate "Intel Broxton PMIC thermal driver" > > > - depends on X86 && INTEL_SOC_PMIC && REGMAP > > > + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP > > > help > > > Select this driver for Intel Broxton PMIC with ADC > > > channels monitoring > > > system temperature measurements and alerts. > > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html