Hi Ralph, On ven., mars 24 2017, Ralph Sennhauser <ralph.sennhauser@xxxxxxxxx> wrote: > On Thu, 23 Mar 2017 17:40:53 +0100 > Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> wrote: > >> Hi Ralph, >> >> On sam., mars 18 2017, Ralph Sennhauser <ralph.sennhauser@xxxxxxxxx> >> wrote: >> >> It seems that I don't receive the 1st patch of the series. > > Hi Gregory, > > it makes no sense to only send part of a series to a recipient. Will To be frank it depends. Some maintainers don't want to receive a patch which is not related to their subsystem. But it is not my case, I prefer to have the full picture. > have to improve my use of --cc-cmd it seems. Will pay attention to this > for v3. Also don't forget to add te cover letter too if you have written one. Thanks! Gregory > > Sorry > Ralph > >> >> Also could you refresh my mind to expose why these patchse were not >> apply the first time and why we should apply them now? >> >> Thanks, >> >> Gregory >> >> >> > From: Andrew Lunn <andrew@xxxxxxx> >> > >> > Add properties to the gpio nodes to allow them to be also used as >> > pwm lines. >> > >> > Signed-off-by: Andrew Lunn <andrew@xxxxxxx> >> > URL: https://patchwork.ozlabs.org/patch/427294/ >> > Signed-off-by: Ralph Sennhauser <ralph.sennhauser@xxxxxxxxx> >> > --- >> > arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- >> > arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- >> > arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- >> > arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- >> > 4 files changed, 30 insertions(+), 8 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/armada-370.dtsi >> > b/arch/arm/boot/dts/armada-370.dtsi index cc011c8..aa9fe72 100644 >> > --- a/arch/arm/boot/dts/armada-370.dtsi >> > +++ b/arch/arm/boot/dts/armada-370.dtsi >> > @@ -138,24 +138,30 @@ >> > >> > gpio0: gpio@18100 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18100 0x40>; >> > + reg = <0x18100 0x40>, <0x181c0 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <82>, <83>, <84>, >> > <85>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio1: gpio@18140 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18140 0x40>; >> > + reg = <0x18140 0x40>, <0x181c8 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <87>, <88>, <89>, >> > <90>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio2: gpio@18180 { >> > diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi >> > b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090..fc3934f >> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi >> > +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi >> > @@ -203,24 +203,30 @@ >> > internal-regs { >> > gpio0: gpio@18100 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18100 0x40>; >> > + reg = <0x18100 0x40>, <0x181c0 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <82>, <83>, <84>, >> > <85>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio1: gpio@18140 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18140 0x40>; >> > + reg = <0x18140 0x40>, <0x181c8 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <17>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <87>, <88>, <89>; >> > + clocks = <&coreclk 0>; >> > }; >> > }; >> > }; >> > diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi >> > b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936a..04dda6a >> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi >> > +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi >> > @@ -286,24 +286,28 @@ >> > internal-regs { >> > gpio0: gpio@18100 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18100 0x40>; >> > + reg = <0x18100 0x40>, <0x181c0 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <82>, <83>, <84>, >> > <85>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio1: gpio@18140 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18140 0x40>; >> > + reg = <0x18140 0x40>, <0x181c8 >> > 0x08>; ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <87>, <88>, <89>, >> > <90>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio2: gpio@18180 { >> > diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi >> > b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dd..fb6d28a >> > 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi >> > +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi >> > @@ -324,24 +324,30 @@ >> > internal-regs { >> > gpio0: gpio@18100 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18100 0x40>; >> > + reg = <0x18100 0x40>, <0x181c0 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <82>, <83>, <84>, >> > <85>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio1: gpio@18140 { >> > compatible = "marvell,orion-gpio"; >> > - reg = <0x18140 0x40>; >> > + reg = <0x18140 0x40>, <0x181c8 >> > 0x08>; >> > + reg-names = "gpio", "pwm"; >> > ngpios = <32>; >> > gpio-controller; >> > #gpio-cells = <2>; >> > + #pwm-cells = <2>; >> > interrupt-controller; >> > #interrupt-cells = <2>; >> > interrupts = <87>, <88>, <89>, >> > <90>; >> > + clocks = <&coreclk 0>; >> > }; >> > >> > gpio2: gpio@18180 { >> > -- >> > 2.10.2 >> > >> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html