Re: [PATCH v2] pinctrl: samsung: Calculate GPIO base for pinctrl_add_gpio_range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Charles,

2017-03-01 2:04 GMT+09:00 Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>:
> As the pinctrl is now added before the GPIOs are registered we need to
> manually calculate what the GPIO base will be, otherwise the base for
> each gpio_range will be set to zero. Fortunately the driver
> already assigns a GPIO base, in samsung_gpiolib_register, and uses the
> same calculation it does for the pin_base. Meaning the two will always
> be the same and allowing us to reuse the pinbase and avoid the issue.

Sorry, I didn't notice before and I don't see the offending patch in ,
but you should add

Fixes: XXXXXXXXXXXX ("pinctrl: Patch subject")

if you intend to submit this patch separately. Otherwise, maybe this
can be just squashed?

>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes since v1:
>  - Use grange.base in samsung_gpiolib_register to make it more
>    clear the two are related in the driver.

Other than the above:

Acked-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux