The ThunderX/OCTEON-TX GPIO hardware looks like a PCIe device, with the interrupt signal from each GPIO line being routed to a dedicated MSI-X. This interrupt routing requires that we add some custom processing to the beginning of the MSI-X irqdomain hierarchy. Changes from v3: - Add some "depends on" to the driver Kconfig to avoid build errors in some architectures when doing COMPILE_TEST builds. Changes from v2: - in 4/6: Added Rob Harring's Acked-by - Added three patches to genirq/irqdomain to support interrupt code in the driver. - Rewrite irq code in driver to use irqdomain hierarchy. - Other naming and style changes as recommended by Linus Walleij. Changes from v1: - in 1/3: Addressed Rob Harring's comments. - in 2/3: Trivial cleanups found in internal review + add some comments. David Daney (6): genirq: Export more irq_chip_*_parent() functions. genirq: Add handle_fasteoi_{level,edge}_irq flow handlers. irqdomain: Add irq_domain_{push,pop}_irq() functions. dt-bindings: gpio: Add binding documentation for gpio-thunderx gpio: Add gpio driver support for ThunderX and OCTEON-TX MAINTAINERS: Add entry for THUNDERX GPIO Driver. .../devicetree/bindings/gpio/gpio-thunderx.txt | 27 ++ MAINTAINERS | 5 + drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-thunderx.c | 490 +++++++++++++++++++++ include/linux/irq.h | 2 + include/linux/irqdomain.h | 3 + kernel/irq/chip.c | 105 +++++ kernel/irq/irqdomain.c | 137 ++++++ 9 files changed, 778 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-thunderx.txt create mode 100644 drivers/gpio/gpio-thunderx.c -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html