Hi Heiko,
Sorry for late reply because of the holiday.
@@ -355,6 +359,24 @@ struct rockchip_pinctrl {
unsigned int nfunctions;
};
+/**
+ * struct rockchip_mux_recalced_data: represent a pin iomux data.
+ * @num: bank num.
+ * @bit: index at register or used to calc index.
+ * @min_pin: the min pin.
+ * @max_pin: the max pin.
+ * @reg: the register offset.
+ * @mask: mask bit
+ */
+struct rockchip_mux_recalced_data {
+ u8 num;
+ u8 bit;
+ int min_pin;
+ int max_pin;
+ int reg;
+ int mask;
please reorganize
num, min_pin, max_pin are the queried values
while
reg, bit, mask are the result values
Mixing these makes it hard to understand. Same for the table below.
How about this struct?
struct rockchip_mux_recalced_data {
struct {
u8 num;
int pin;
} querie;
struct {
u8 reg;
u8 bit;
u8 mask;
} result;
};
+};
+
static struct regmap_config rockchip_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
@@ -514,13 +536,83 @@ static void rockchip_dt_free_map(struct pinctrl_dev
*pctldev, * Hardware access
*/
+static const struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] =
{ + {
+ .num = 2,
+ .bit = 0x2,
+ .min_pin = 8,
+ .max_pin = 14,
+ .reg = 0x24,
+ .mask = 0x3
+ },
+ {
+ .num = 2,
+ .bit = 0,
+ .min_pin = 15,
+ .max_pin = 15,
+ .reg = 0x28,
+ .mask = 0x7
+ },
+ {
nit: coding style, "}, {"
+ .num = 2,
+ .bit = 14,
+ .min_pin = 23,
+ .max_pin = 23,
+ .reg = 0x30,
+ .mask = 0x3
+ },
+ {
+ .num = 3,
+ .bit = 0,
+ .min_pin = 8,
+ .max_pin = 8,
+ .reg = 0x40,
+ .mask = 0x7
+ },
+ {
+ .num = 3,
+ .bit = 0x2,
+ .min_pin = 9,
+ .max_pin = 15,
+ .reg = 0x44,
+ .mask = 0x3
I think I don't fully understand what this is supposed to do. In the TRM you
send me at 0x44 all bits are marked as reserved and the other registers also
look very strange.
Sorry, there is a wrong description in my patch.
The reserved pins are not opened at rk3328 soc, could not be used, but
they appear in my code, this makes you confused.
There are three pins need to be recalculated from the the latest GRF i
sent to you just now.
- gpio2_b4
- gpio2_b7
- gpio2_c7
So, the max_pin and min_pin changes to pin in the
"rockchip_mux_recalced_data" struct, because there are no serial pins to
be recalculated, but three single pins.
I guess GPIO2CH_IOMUX shows the thing you're trying solve, with gpio2_c6 being
at [5:3] but gpio2_c7 got moved to [15:14] out of its natural position.
Chip designers have strange ideas it seems.
Yes, it is very strange here, not so well-regulated.
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
