Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic

[Rob Herring <robh@xxxxxxxxxx>]

On Wed, Jan 25, 2017 at 07:51:54PM +0100, Paul Cercueil wrote:
> This commit adds documentation for the devicetree bidings of the
> pinctrl-ingenic driver, which handles pin configuration and pin
> muxing of the Ingenic SoCs currently supported by the Linux kernel.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  .../bindings/pinctrl/ingenic,pinctrl.txt           | 77 ++++++++++++++++++++++
>  1 file changed, 77 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
> 
> v2: Rewrote the documentation for the new pinctrl-ingenic driver
> v3: No changes
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
> new file mode 100644
> index 000000000000..ead5b01ad471
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
> @@ -0,0 +1,77 @@
> +Ingenic jz47xx pin controller
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
> +be used as GPIOs, multiplexed device functions are configured within the
> +GPIO port configuration registers and it is typical to refer to pins using the
> +naming scheme "PxN" where x is a character identifying the GPIO port with
> +which the pin is associated and N is an integer from 0 to 31 identifying the
> +pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
> +PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
> +PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
> +total of 192 pins.

>From the overlapping register addresses in the examples and this 
description, it looks like the pinctrlr and gpio controller are 1 block. 
If so, then there should only be 1 node.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html