On Wed, Jan 25, 2017 at 10:00:06PM +0200, Krzysztof Kozlowski wrote: > On Wed, Jan 25, 2017 at 12:50:30PM +0100, Marek Szyprowski wrote: > > Exynos LPASS requires some clocks to be enabled to make any access to its > > registers. This patch adds code for handling such clocks. For current set > > of registers it is enough to keep sfr0_ctrl clock enabled. Till now it > > worked only because those clocks were enabled by bootloader and driver > > probe() happened before they were disabled by clock core because of lack > > of users. Handling those clocks is also needed to make it possible to > > enable support for audio power domain. > > > > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> > > --- > > .../devicetree/bindings/mfd/samsung,exynos5433-lpass.txt | 6 ++++++ > > drivers/mfd/exynos-lpass.c | 10 ++++++++++ > > 2 files changed, 16 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > > index a8deaee82c44..df664018c148 100644 > > --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > > +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > > @@ -5,6 +5,10 @@ Required properties: > > - compatible : "samsung,exynos5433-lpass" > > - reg : should contain the LPASS top SFR region location > > and size > > + - clock-names : should contain following required clocks: "sfr0_ctrl" > > + - clocks : should contain clock specifiers of all clocks, which > > + input names have been specified in clock-names > > + property, in same order. > > - #address-cells : should be 1 > > - #size-cells : should be 1 > > - ranges : must be present > > @@ -24,6 +28,8 @@ Example: > > audio-subsystem { > > compatible = "samsung,exynos5433-lpass"; > > reg = <0x11400000 0x100>, <0x11500000 0x08>; > > + clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; > > + clock-names = "sfr0_ctrl"; > > #address-cells = <1>; > > #size-cells = <1>; > > ranges; > > diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c > > index 17915daa2e80..44d8ea1a978b 100644 > > --- a/drivers/mfd/exynos-lpass.c > > +++ b/drivers/mfd/exynos-lpass.c > > @@ -14,6 +14,7 @@ > > * only version 2 as published by the Free Software Foundation. > > */ > > > > +#include <linux/clk.h> > > #include <linux/delay.h> > > #include <linux/io.h> > > #include <linux/module.h> > > @@ -52,6 +53,7 @@ > > struct exynos_lpass { > > /* pointer to the LPASS TOP regmap */ > > struct regmap *top; > > + struct clk *sfr0_clk; > > }; > > > > static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) > > @@ -71,6 +73,8 @@ static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) > > > > static void exynos_lpass_enable(struct exynos_lpass *lpass) > > { > > + clk_prepare_enable(lpass->sfr0_clk); > > + > > /* Unmask SFR, DMA and I2S interrupt */ > > regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, > > LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S); > > @@ -88,6 +92,8 @@ static void exynos_lpass_disable(struct exynos_lpass *lpass) > > /* Mask any unmasked IP interrupt sources */ > > regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0); > > regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0); > > + > > + clk_disable_unprepare(lpass->sfr0_clk); > > } > > > > static const struct regmap_config exynos_lpass_reg_conf = { > > @@ -114,6 +120,10 @@ static int exynos_lpass_probe(struct platform_device *pdev) > > if (IS_ERR(base_top)) > > return PTR_ERR(base_top); > > > > + lpass->sfr0_clk = clk_get(dev, "sfr0_ctrl"); > > + if (IS_ERR(lpass->sfr0_clk)) > > + return PTR_ERR(lpass->sfr0_clk); > > devm_clk_get() or implement the remove() or the unbind should be > suppressed. > > Not related to this particular patch, but: > 1. regmap_exit() is also missing (anyone would like to add it?), > 2. Also I wonder, whether we would like to disable the LPASS on > unbind... I forgot about one thing - please mention in the commit message that this breaks the ABI or requires changes in DTS to provide the clock. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html