[RFC 2/5] pinctrl: rz-pfc: Add Renesas RZ/A1 pinctrl driver

[Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>]

Add pin controller driver for Renesas RZ/A1 SoC.
The SoC driver registers to rz-pfc core module and provides pin
description array and SoC specific pin mux operation.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
 drivers/pinctrl/rz-pfc/Kconfig        |   7 +
 drivers/pinctrl/rz-pfc/Makefile       |   1 +
 drivers/pinctrl/rz-pfc/pinctrl-rza1.c | 347 ++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 drivers/pinctrl/rz-pfc/pinctrl-rza1.c

diff --git a/drivers/pinctrl/rz-pfc/Kconfig b/drivers/pinctrl/rz-pfc/Kconfig
index 3714c10..2b9c111 100644
--- a/drivers/pinctrl/rz-pfc/Kconfig
+++ b/drivers/pinctrl/rz-pfc/Kconfig
@@ -15,4 +15,11 @@ config PINCTRL_RZ_PINCTRL
 	help
 	  This enables pin control drivers for Renesas RZ platforms
 
+config PINCTRL_RZA1_PINCTRL
+    depends on ARCH_R7S72100
+	select PINCTRL_RZ_PINCTRL
+	def_bool y
+	help
+	  This enables pin control drivers for Renesas RZ/A1 SoC
+
 endif
diff --git a/drivers/pinctrl/rz-pfc/Makefile b/drivers/pinctrl/rz-pfc/Makefile
index cba8283..e3befa5 100644
--- a/drivers/pinctrl/rz-pfc/Makefile
+++ b/drivers/pinctrl/rz-pfc/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_PINCTRL_RZ_PINCTRL)		+= pinctrl-rz.o
+obj-$(CONFIG_PINCTRL_RZA1_PINCTRL)		+= pinctrl-rza1.o
diff --git a/drivers/pinctrl/rz-pfc/pinctrl-rza1.c b/drivers/pinctrl/rz-pfc/pinctrl-rza1.c
new file mode 100644
index 0000000..221f048
--- /dev/null
+++ b/drivers/pinctrl/rz-pfc/pinctrl-rza1.c
@@ -0,0 +1,347 @@
+/*
+ * Pinctrl support for Renesas RZ/A1 SoC
+ *
+ * Copyright (C) 2017 Jacopo Mondi
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "pinctrl-rz.h"
+
+#define RZA1_REG_DBG
+
+/* memory resources indexes */
+#define MEM_RES_LOW	0 /* PORTn_base */
+#define MEM_RES_HIGH	1 /* PORTn_base + 0x4000 */
+
+/* displacements from PORTn_base */
+#define PMC_REG		0x400
+#define PFC_REG		0x500
+#define PFCE_REG	0x600
+#define PFCEA_REG	0xA00
+
+/* displacements from PORTn_base + 0x4000 */
+#define PIBC_REG	0x000
+#define PBDC_REG	0x100
+#define PIPC_REG	0x200
+
+/* build register address using memory base, offset and bank number */
+#define RZA1_ADDR(mem_base, reg, bank)	\
+	((mem_base) + (reg) + (bank * 4))
+
+/* ----------------------------------------------------------------------------
+ * pin enumeration
+ */
+enum rza1_pins {
+	/* Port 0 */
+	RZ_PIN_NAME(0, 0) = 0, RZ_PIN_NAME(0, 1), RZ_PIN_NAME(0, 2),
+	RZ_PIN_NAME(0, 3), RZ_PIN_NAME(0, 4), RZ_PIN_NAME(0, 5),
+
+	/* Port 1 */
+	RZ_PIN_NAME(1, 0), RZ_PIN_NAME(1, 1), RZ_PIN_NAME(1, 2),
+	RZ_PIN_NAME(1, 3), RZ_PIN_NAME(1, 4), RZ_PIN_NAME(1, 5),
+	RZ_PIN_NAME(1, 6), RZ_PIN_NAME(1, 7), RZ_PIN_NAME(1, 8),
+	RZ_PIN_NAME(1, 9), RZ_PIN_NAME(1, 10), RZ_PIN_NAME(1, 11),
+	RZ_PIN_NAME(1, 12), RZ_PIN_NAME(1, 13), RZ_PIN_NAME(1, 14),
+	RZ_PIN_NAME(1, 15),
+
+	/* Port 2 */
+	RZ_PIN_NAME(2, 0), RZ_PIN_NAME(2, 1), RZ_PIN_NAME(2, 2),
+	RZ_PIN_NAME(2, 3), RZ_PIN_NAME(2, 4), RZ_PIN_NAME(2, 5),
+	RZ_PIN_NAME(2, 6), RZ_PIN_NAME(2, 7), RZ_PIN_NAME(2, 8),
+	RZ_PIN_NAME(2, 9), RZ_PIN_NAME(2, 10), RZ_PIN_NAME(2, 11),
+	RZ_PIN_NAME(2, 12), RZ_PIN_NAME(2, 13), RZ_PIN_NAME(2, 14),
+	RZ_PIN_NAME(2, 15),
+
+	/* Port 3 */
+	RZ_PIN_NAME(3, 0), RZ_PIN_NAME(3, 1), RZ_PIN_NAME(3, 2),
+	RZ_PIN_NAME(3, 3), RZ_PIN_NAME(3, 4), RZ_PIN_NAME(3, 5),
+	RZ_PIN_NAME(3, 6), RZ_PIN_NAME(3, 7), RZ_PIN_NAME(3, 8),
+	RZ_PIN_NAME(3, 9), RZ_PIN_NAME(3, 10), RZ_PIN_NAME(3, 11),
+	RZ_PIN_NAME(3, 12), RZ_PIN_NAME(3, 13), RZ_PIN_NAME(3, 14),
+	RZ_PIN_NAME(3, 15),
+
+	/* Port 4 */
+	RZ_PIN_NAME(4, 0), RZ_PIN_NAME(4, 1), RZ_PIN_NAME(4, 2),
+	RZ_PIN_NAME(4, 3), RZ_PIN_NAME(4, 4), RZ_PIN_NAME(4, 5),
+	RZ_PIN_NAME(4, 6), RZ_PIN_NAME(4, 7), RZ_PIN_NAME(4, 8),
+	RZ_PIN_NAME(4, 9), RZ_PIN_NAME(4, 10), RZ_PIN_NAME(4, 11),
+	RZ_PIN_NAME(4, 12), RZ_PIN_NAME(4, 13), RZ_PIN_NAME(4, 14),
+	RZ_PIN_NAME(4, 15),
+
+	/* Port 5 */
+	RZ_PIN_NAME(5, 0), RZ_PIN_NAME(5, 1), RZ_PIN_NAME(5, 2),
+	RZ_PIN_NAME(5, 3), RZ_PIN_NAME(5, 4), RZ_PIN_NAME(5, 5),
+	RZ_PIN_NAME(5, 6), RZ_PIN_NAME(5, 7), RZ_PIN_NAME(5, 8),
+	RZ_PIN_NAME(5, 9), RZ_PIN_NAME(5, 10),
+
+	/* Port 6 */
+	RZ_PIN_NAME(6, 0), RZ_PIN_NAME(6, 1), RZ_PIN_NAME(6, 2),
+	RZ_PIN_NAME(6, 3), RZ_PIN_NAME(6, 4), RZ_PIN_NAME(6, 5),
+	RZ_PIN_NAME(6, 6), RZ_PIN_NAME(6, 7), RZ_PIN_NAME(6, 8),
+	RZ_PIN_NAME(6, 9), RZ_PIN_NAME(6, 10), RZ_PIN_NAME(6, 11),
+	RZ_PIN_NAME(6, 12), RZ_PIN_NAME(6, 13), RZ_PIN_NAME(6, 14),
+	RZ_PIN_NAME(6, 15),
+
+	/* Port 7 */
+	RZ_PIN_NAME(7, 0), RZ_PIN_NAME(7, 1), RZ_PIN_NAME(7, 2),
+	RZ_PIN_NAME(7, 3), RZ_PIN_NAME(7, 4), RZ_PIN_NAME(7, 5),
+	RZ_PIN_NAME(7, 6), RZ_PIN_NAME(7, 7), RZ_PIN_NAME(7, 8),
+	RZ_PIN_NAME(7, 9), RZ_PIN_NAME(7, 10), RZ_PIN_NAME(7, 11),
+	RZ_PIN_NAME(7, 12), RZ_PIN_NAME(7, 13), RZ_PIN_NAME(7, 14),
+	RZ_PIN_NAME(7, 15),
+
+	/* Port 8 */
+	RZ_PIN_NAME(8, 0), RZ_PIN_NAME(8, 1), RZ_PIN_NAME(8, 2),
+	RZ_PIN_NAME(8, 3), RZ_PIN_NAME(8, 4), RZ_PIN_NAME(8, 5),
+	RZ_PIN_NAME(8, 6), RZ_PIN_NAME(8, 7), RZ_PIN_NAME(8, 8),
+	RZ_PIN_NAME(8, 9), RZ_PIN_NAME(8, 10), RZ_PIN_NAME(8, 11),
+	RZ_PIN_NAME(8, 12), RZ_PIN_NAME(8, 13), RZ_PIN_NAME(8, 14),
+	RZ_PIN_NAME(8, 15),
+
+	/* Port 9 */
+	RZ_PIN_NAME(9, 0), RZ_PIN_NAME(9, 1), RZ_PIN_NAME(9, 2),
+	RZ_PIN_NAME(9, 3), RZ_PIN_NAME(9, 4), RZ_PIN_NAME(9, 5),
+	RZ_PIN_NAME(9, 6), RZ_PIN_NAME(9, 7),
+
+	/* Port 10 */
+	RZ_PIN_NAME(10, 0), RZ_PIN_NAME(10, 1), RZ_PIN_NAME(10, 2),
+	RZ_PIN_NAME(10, 3), RZ_PIN_NAME(10, 4), RZ_PIN_NAME(10, 5),
+	RZ_PIN_NAME(10, 6), RZ_PIN_NAME(10, 7), RZ_PIN_NAME(10, 8),
+	RZ_PIN_NAME(10, 9), RZ_PIN_NAME(10, 10), RZ_PIN_NAME(10, 11),
+	RZ_PIN_NAME(10, 12), RZ_PIN_NAME(10, 13), RZ_PIN_NAME(10, 14),
+	RZ_PIN_NAME(10, 15),
+
+	/* Port 10 */
+	RZ_PIN_NAME(11, 0), RZ_PIN_NAME(11, 1), RZ_PIN_NAME(11, 2),
+	RZ_PIN_NAME(11, 3), RZ_PIN_NAME(11, 4), RZ_PIN_NAME(11, 5),
+	RZ_PIN_NAME(11, 6), RZ_PIN_NAME(11, 7), RZ_PIN_NAME(11, 8),
+	RZ_PIN_NAME(11, 9), RZ_PIN_NAME(11, 10), RZ_PIN_NAME(11, 11),
+	RZ_PIN_NAME(11, 12), RZ_PIN_NAME(11, 13), RZ_PIN_NAME(11, 14),
+	RZ_PIN_NAME(11, 15),
+};
+
+struct rz_pin_desc pins[] = {
+	/* Port 0 */
+	RZ_PIN_DESC(0, 0), RZ_PIN_DESC(0, 1), RZ_PIN_DESC(0, 2),
+	RZ_PIN_DESC(0, 3), RZ_PIN_DESC(0, 4), RZ_PIN_DESC(0, 5),
+
+	/* Port 1 */
+	RZ_PIN_DESC(1, 0), RZ_PIN_DESC(1, 1), RZ_PIN_DESC(1, 2),
+	RZ_PIN_DESC(1, 3), RZ_PIN_DESC(1, 4), RZ_PIN_DESC(1, 5),
+	RZ_PIN_DESC(1, 6), RZ_PIN_DESC(1, 7), RZ_PIN_DESC(1, 8),
+	RZ_PIN_DESC(1, 9), RZ_PIN_DESC(1, 10), RZ_PIN_DESC(1, 11),
+	RZ_PIN_DESC(1, 12), RZ_PIN_DESC(1, 13), RZ_PIN_DESC(1, 14),
+	RZ_PIN_DESC(1, 15),
+
+	/* Port 2 */
+	RZ_PIN_DESC(2, 0), RZ_PIN_DESC(2, 1), RZ_PIN_DESC(2, 2),
+	RZ_PIN_DESC(2, 3), RZ_PIN_DESC(2, 4), RZ_PIN_DESC(2, 5),
+	RZ_PIN_DESC(2, 6), RZ_PIN_DESC(2, 7), RZ_PIN_DESC(2, 8),
+	RZ_PIN_DESC(2, 9), RZ_PIN_DESC(2, 10), RZ_PIN_DESC(2, 11),
+	RZ_PIN_DESC(2, 12), RZ_PIN_DESC(2, 13), RZ_PIN_DESC(2, 14),
+	RZ_PIN_DESC(2, 15),
+
+	/* Port 3 */
+	RZ_PIN_DESC(3, 0), RZ_PIN_DESC(3, 1), RZ_PIN_DESC(3, 2),
+	RZ_PIN_DESC(3, 3), RZ_PIN_DESC(3, 4), RZ_PIN_DESC(3, 5),
+	RZ_PIN_DESC(3, 6), RZ_PIN_DESC(3, 7), RZ_PIN_DESC(3, 8),
+	RZ_PIN_DESC(3, 9), RZ_PIN_DESC(3, 10), RZ_PIN_DESC(3, 11),
+	RZ_PIN_DESC(3, 12), RZ_PIN_DESC(3, 13), RZ_PIN_DESC(3, 14),
+	RZ_PIN_DESC(3, 15),
+
+	/* Port 4 */
+	RZ_PIN_DESC(4, 0), RZ_PIN_DESC(4, 1), RZ_PIN_DESC(4, 2),
+	RZ_PIN_DESC(4, 3), RZ_PIN_DESC(4, 4), RZ_PIN_DESC(4, 5),
+	RZ_PIN_DESC(4, 6), RZ_PIN_DESC(4, 7), RZ_PIN_DESC(4, 8),
+	RZ_PIN_DESC(4, 9), RZ_PIN_DESC(4, 10), RZ_PIN_DESC(4, 11),
+	RZ_PIN_DESC(4, 12), RZ_PIN_DESC(4, 13), RZ_PIN_DESC(4, 14),
+	RZ_PIN_DESC(4, 15),
+
+	/* Port 5 */
+	RZ_PIN_DESC(5, 0), RZ_PIN_DESC(5, 1), RZ_PIN_DESC(5, 2),
+	RZ_PIN_DESC(5, 3), RZ_PIN_DESC(5, 4), RZ_PIN_DESC(5, 5),
+	RZ_PIN_DESC(5, 6), RZ_PIN_DESC(5, 7), RZ_PIN_DESC(5, 8),
+	RZ_PIN_DESC(5, 9), RZ_PIN_DESC(5, 10),
+
+	/* Port 6 */
+	RZ_PIN_DESC(6, 0), RZ_PIN_DESC(6, 1), RZ_PIN_DESC(6, 2),
+	RZ_PIN_DESC(6, 3), RZ_PIN_DESC(6, 4), RZ_PIN_DESC(6, 5),
+	RZ_PIN_DESC(6, 6), RZ_PIN_DESC(6, 7), RZ_PIN_DESC(6, 8),
+	RZ_PIN_DESC(6, 9), RZ_PIN_DESC(6, 10), RZ_PIN_DESC(6, 11),
+	RZ_PIN_DESC(6, 12), RZ_PIN_DESC(6, 13), RZ_PIN_DESC(6, 14),
+	RZ_PIN_DESC(6, 15),
+
+	/* Port 7 */
+	RZ_PIN_DESC(7, 0), RZ_PIN_DESC(7, 1), RZ_PIN_DESC(7, 2),
+	RZ_PIN_DESC(7, 3), RZ_PIN_DESC(7, 4), RZ_PIN_DESC(7, 5),
+	RZ_PIN_DESC(7, 6), RZ_PIN_DESC(7, 7), RZ_PIN_DESC(7, 8),
+	RZ_PIN_DESC(7, 9), RZ_PIN_DESC(7, 10), RZ_PIN_DESC(7, 11),
+	RZ_PIN_DESC(7, 12), RZ_PIN_DESC(7, 13), RZ_PIN_DESC(7, 14),
+	RZ_PIN_DESC(7, 15),
+
+	/* Port 8 */
+	RZ_PIN_DESC(8, 0), RZ_PIN_DESC(8, 1), RZ_PIN_DESC(8, 2),
+	RZ_PIN_DESC(8, 3), RZ_PIN_DESC(8, 4), RZ_PIN_DESC(8, 5),
+	RZ_PIN_DESC(8, 6), RZ_PIN_DESC(8, 7), RZ_PIN_DESC(8, 8),
+	RZ_PIN_DESC(8, 9), RZ_PIN_DESC(8, 10), RZ_PIN_DESC(8, 11),
+	RZ_PIN_DESC(8, 12), RZ_PIN_DESC(8, 13), RZ_PIN_DESC(8, 14),
+	RZ_PIN_DESC(8, 15),
+
+	/* Port 9 */
+	RZ_PIN_DESC(9, 0), RZ_PIN_DESC(9, 1), RZ_PIN_DESC(9, 2),
+	RZ_PIN_DESC(9, 3), RZ_PIN_DESC(9, 4), RZ_PIN_DESC(9, 5),
+	RZ_PIN_DESC(9, 6), RZ_PIN_DESC(9, 7),
+
+	/* Port 10 */
+	RZ_PIN_DESC(10, 0), RZ_PIN_DESC(10, 1), RZ_PIN_DESC(10, 2),
+	RZ_PIN_DESC(10, 3), RZ_PIN_DESC(10, 4), RZ_PIN_DESC(10, 5),
+	RZ_PIN_DESC(10, 6), RZ_PIN_DESC(10, 7), RZ_PIN_DESC(10, 8),
+	RZ_PIN_DESC(10, 9), RZ_PIN_DESC(10, 10), RZ_PIN_DESC(10, 11),
+	RZ_PIN_DESC(10, 12), RZ_PIN_DESC(10, 13), RZ_PIN_DESC(10, 14),
+	RZ_PIN_DESC(10, 15),
+
+	/* Port 11 */
+	RZ_PIN_DESC(11, 0), RZ_PIN_DESC(11, 1), RZ_PIN_DESC(11, 2),
+	RZ_PIN_DESC(11, 3), RZ_PIN_DESC(11, 4), RZ_PIN_DESC(11, 5),
+	RZ_PIN_DESC(11, 6), RZ_PIN_DESC(11, 7), RZ_PIN_DESC(11, 8),
+	RZ_PIN_DESC(11, 9), RZ_PIN_DESC(11, 10), RZ_PIN_DESC(11, 11),
+	RZ_PIN_DESC(11, 12), RZ_PIN_DESC(11, 13), RZ_PIN_DESC(11, 14),
+	RZ_PIN_DESC(11, 15),
+};
+
+/* ----------------------------------------------------------------------------
+ * SoC operations
+ */
+
+static inline void rza1_set_bit(struct rz_pinctrl_res *res, int reg,
+				int bank, int pin, int set)
+{
+	void __iomem *mem = RZA1_ADDR(res->base, reg, bank);
+	u16 val = set ? ioread16(mem) | 1 << pin :
+			ioread16(mem) & ~(1 << pin);
+#ifdef RZA1_REG_DBG
+	u16 temp = ioread16(mem);
+
+	pr_err("%p %p %p - %4x %4x\n",
+	       (void *)res->start, res->base, mem, temp, val);
+#endif
+	iowrite16(val, mem);
+}
+
+/**
+ * rza1_set_mux() - Configure alternate function settings for the selected pin
+ *
+ * @pinctrl: RZ pincontroller
+ * @pin: Pin to configure
+ * @mux_mode: Alternate function number
+ *
+ * @return: 0 for success; != 0 otherwise
+ */
+static int rza1_set_mux(struct rz_pinctrl_dev *pinctrl,
+			struct rz_pin_desc *pin_desc, unsigned int mux_mode)
+{
+	struct rz_pinctrl_res *res;
+	unsigned int bank = pin_desc->bank,
+		     pin = pin_desc->pin;
+
+	/*
+	 * disable input buffer and bi-control direction before entering
+	 * alternate mode and let alternate function drive the IO mode by
+	 * setting PIPCn to 1
+	 */
+	res = &pinctrl->res[MEM_RES_HIGH];
+	rza1_set_bit(res, PIBC_REG, bank, pin, 0);
+	rza1_set_bit(res, PBDC_REG, bank, pin, 0);
+	rza1_set_bit(res, PIPC_REG, bank, pin, 1);
+
+	/* TODO:
+	 * all alternate functions except a few (3) need PIPCn = 1;
+	 * find a way to identify those 3 functions, do not set PIPCn to 1
+	 * and set PMn according to some flag passed as parameter from DTS
+	 */
+
+	/*
+	 * enable alternate function mode and select it.
+	 *
+	 * ----------------------------------------------------
+	 * Alternate mode selection table:
+	 *
+	 * PMC	PFC	PFCE	PFCAE	AlternateMode mux_mode
+	 * 1	0	0	0	1		0
+	 * 1	1	0	0	2		1
+	 * 1	0	1	0	3		2
+	 * 1	1	1	0	4		3
+	 * 1	0	0	1	5		4
+	 * 1	1	0	1	6		5
+	 * 1	0	1	1	7		6
+	 * 1	1	1	1	8		7
+	 * ----------------------------------------------------
+	 */
+	res = &pinctrl->res[MEM_RES_LOW];
+	rza1_set_bit(res, PMC_REG, bank, pin, 1);
+	rza1_set_bit(res, PFC_REG, bank, pin, mux_mode & 0x1);
+	rza1_set_bit(res, PFCE_REG, bank, pin, mux_mode & 0x2);
+	rza1_set_bit(res, PFCEA_REG, bank, pin, mux_mode & 0x4);
+
+	return 0;
+}
+
+static struct rz_pinctrl_ops rza1_pinctrl_ops = {
+	.set_mux = rza1_set_mux,
+};
+
+static struct rz_pinctrl_info rza1_info = {
+	.ops = &rza1_pinctrl_ops,
+
+	.npins = ARRAY_SIZE(pins),
+	.pins = pins,
+};
+
+static const struct of_device_id rza1_pinctrl_of_match[] = {
+	{ .compatible = "renesas,rza1-pinctrl", },
+	{ }
+};
+
+static int rza1_pinctrl_probe(struct platform_device *pdev)
+{
+	return rz_pinctrl_probe(pdev, &rza1_info);
+}
+
+static int rza1_pinctrl_remove(struct platform_device *pdev)
+{
+	rz_pinctrl_remove(pdev);
+
+	return 0;
+}
+
+static struct platform_driver rza1_pinctrl_driver = {
+	.driver = {
+		.name = "rza1_pinctrl_driver",
+		.of_match_table = rza1_pinctrl_of_match,
+	},
+	.probe = rza1_pinctrl_probe,
+	.remove = rza1_pinctrl_remove,
+};
+
+static int __init rza1_pinctrl_init(void)
+{
+	return platform_driver_register(&rza1_pinctrl_driver);
+}
+core_initcall(rza1_pinctrl_init);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@xxxxxxxxxx");
+MODULE_DESCRIPTION("Pinctl driver for Reneas RZ/A1 SoC");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html