Hi Chris,
On 12/01/2017 15:39, Chris Brandt wrote:
Hi Jacopo,
On Thursday, January 12, 2017, jacopo mondi wrote:
To read the pin direction I would need to add one more register to the
"reg" property range provided in the DTS.
This is of course doable, but I would have two questions here:
- why did you chose to use PMSR register instead of reading/writing
directly to PM? Am I missing something?
I guess you can still use the PMSR register to get the current direction
of the I/O pin. According to the HW manual:
"When reading, the higher 16 bits are read as 0000H. The lower 16 bits
are read as the value of the PMn register."
Oh! That's weird I don't have that statement in my manual (public
version R01UH0403EJ0060 Rev.0.60)
The only description for PMSR I have is:
"This register provides an alternative method for writing data to the
PMn register.
The higher 16 bits of the PMSRn register specify whether data can be
written to the PMn.PMnm bit specified by the
lower 16 bits of the PMSRn register."
So I assumed it was one direction only
While the PMSR register is a cool idea of having a special register that
can change a single port pin direction without doing a read-modify-write
by the CPU, it doesn't seem to be a standard option in Renesas SoCs (well,
except for the older NEC V850 parts where this PFC HW came from).
So a more traditional method of just using the Pmn register seems to be
more compatible across Renesas SoCs.
Chris
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
